D-Link DGS-3308FG Product Manual - Page 109

8-port Gigabit Ethernet Switch User's Guide Highlight Static Router Port Settings from the Multicasting Menu and press Enter. Figure 6-46. Static Router Port Setup screen Note: All IGMP Report packets will be forwarded to the router port. Note: IGMP queries (from the router port) will be flooded to all ports. Note: All UDP multicast packets will be forwarded to the router port. Because routers do not send IGMP reports or implement IGMP snooping, a multi-port router connected to the router port of the Layer 3 switch would not be able to receive UDP data streams at all of its ports unless the UDP multicast packets were all forwarded to the router port. Note: A router port will be dynamically configured when IGMP query packets, RIPv2 multicast, DVMRP multicast, PIM-DM multicast packets are detected flowing into a port. The Action:< > field can be toggled between Add/Modify and Delete using the space bar. To add a port to the static router port table, select Add/Modify and enter the VID of the VLAN the router port will belong to. Highlight the first field of Router Port (:[ ]. Each port can be set individually as a router port by highlighting the port's entry using the arrow keys, and then toggling between M and - using the space bar. Highlight APPLY and press Enter to make the changes current. Use Save Changes from the Main Menu to enter the changes into NV-RAM. To delete an entry, select Delete and enter the VID of the VLAN for which the router port table entry is to be deleted. Highlight APPLY and press Enter. The entry for the VLAN will be deleted. Use Save Changes from the Main Menu to enter the changes into NV-RAM. 99