Dell PowerEdge XL 5133-4 MXL 10/40GbE Switch IO Module FTOS Command Reference - Page 16

www.dell.com | support.dell.com Conventions This document uses the following conventions to describe command syntax: Convention keyword parameter {X} [X] x | y Description Keywords are in bold and must be entered in the CLI as listed. Parameters are in italics and require a number or word to be entered in the CLI. Keywords and parameters within braces must be entered in the CLI. Keywords and parameters within brackets are optional. Keywords and parameters separated by bar require you to choose one. Information Symbols Table 1-1 describes symbols contained in this guide. Table 1-1. Information Symbols Symbol Meaning FTOS Behavior Description This symbol informs you of an FTOS behavior. These behaviors are inherent to the Dell Force10 system or FTOS feature and are non-configurable. * Exception This symbol is a note associated with some other text on the page that is marked with an asterisk. Chassis Management Controller (CMC) user interface This symbol indicates that you can also perform the specified configuration task on an Aggregator by using the CMC graphical interface. For information about how to access the CMC to configure an Aggregator, refer to the Dell PowerEdge M1000e Enclosure Hardware Owner's Manual or Dell Chassis Management Controller (CMC) User's Guide on the Dell Support website at http://support.dell.com/support/edocs/systems/ pem/en/index.htm. Related Documents For more information about the Dell Force10 MXL 10/40GbE Switch IO Module, refer to the following documents: • Dell Force10 FTOS Command Line Reference Guide for the M I/O Aggregator • Dell PowerEdge M I/O Aggregator Getting Started Guide • Release Notes for the M I/O Aggregator (FTOS version 8.3.17.4) 2 | About this Guide