Dell PowerEdge XL 5133-4 MXL 10/40GbE Switch IO Module FTOS Command Reference - Page 83
DCBX Error Messages, An error in DCBX operation is displayed using the following syslog messages:
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
DCBX Error Messages An error in DCBX operation is displayed using the following syslog messages: LLDP_MULTIPLE_PEER_DETECTED: DCBX is operationally disabled after detecting more than one DCBX peer on the port interface. LLDP_PEER_AGE_OUT: DCBX is disabled as a result of LLDP timing out on a DCBX peer interface. DSM_DCBX_PEER_VERSION_CONFLICT: A local port expected to receive the IEEE, CIN, or CEE version in a DCBX TLV from a remote peer but received a different, conflicting DCBX version. DSM_DCBX_PFC_PARAMETERS_MATCH and DSM_DCBX_PFC_PARAMETERS_MISMATCH: A local DCBX port received a compatible (match) or incompatible (mismatch) PFC configuration from a peer. DSM_DCBX_ETS_PARAMETERS_MATCH and DSM_DCBX_ETS_PARAMETERS_MISMATCH: A local DCBX port received a compatible (match) or incompatible (mismatch) ETS configuration from a peer. LLDP_UNRECOGNISED_DCBX_TLV_RECEIVED: A local DCBX port received an unrecognized DCBX TLV from a peer. Debugging DCBX on an Interface To enabled DCBX debug traces for all or a specific control path, use the following command: Task Enable DCBX debugging, where: • all: Enables all DCBX debugging operations. • auto-detect-timer: Enables traces for DCBX auto-detect timers. • config-exchng: Enables traces for DCBX configuration exchanges. • fail: Enables traces for DCBX failures. • mgmt: Enables traces for DCBX management frames. • resource: Enables traces for DCBX system resource frames. • sem: Enables traces for the DCBX state machine. • tlv: Enables traces for DCBX TLVs. Command Command Mode debug dcbx {all | auto-detect-timer | config-exchng | fail | mgmt | resource | sem | tlv} EXEC PRIVILEGE Data Center Bridging (DCB) | 69