Dell PowerEdge XL 5133-4 MXL 10/40GbE Switch IO Module FTOS Command Reference - Page 27
Obtaining Help
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Figure 3-5. Undoing a command with the no Command FTOS(conf)# interface managementethernet 0/0 FTOS(conf-if-ma-0/0)# ip address 192.168.5.6/16 FTOS(conf-if-ma-0/0)# Assign an IP address FTOS(conf-if-ma-0/0)# FTOS(conf-if-ma-0/0)#show config ! interface ManagementEthernet 0/0 ip address 192.168.5.6/16 no shutdown FTOS(conf-if-ma-0/0)# FTOS(conf-if-ma-0/0)# no ip address Enter "no" form of IP address command FTOS(conf-if-ma-0/0)# FTOS(conf-if-ma-0/0)# show config ! interface ManagementEthernet 0/0 no ip address Verify that the IP address was removed no shutdown FTOS(conf-if-ma-0/0)# Obtaining Help Obtain a list of keywords and a brief functional description of those keywords at any CLI mode using the ? or help commands: • Enter ? at the prompt or after a keyword to list the keywords available in the current mode. • ? after a prompt lists all of the available keywords. The output of this command is the same for the help command. Figure 3-6. ? Command Example FTOS#? start capture cd clear clock configure copy --More-- "?" at prompt for list of commands Start Shell Capture Packet Change current directory Reset functions Manage the system clock Configuring from terminal Copy from one file to another • ? after a partial keyword lists all of the keywords that begin with the specified letters. Configuration Fundamentals | 13