Dell PowerEdge XL 5133-4 MXL 10/40GbE Switch IO Module FTOS Command Reference - Page 42
Con a Host Name, Access the System Remotely, Completed Boot Process Contd.
View all Dell PowerEdge XL 5133-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
www.dell.com | support.dell.com Figure 4-7. Completed Boot Process (Contd.) 00:01:11: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Te 0/54 00:01:11: %STKUNIT0-M:CP %DIFFSERV-4-DSM_DCBX_ETS_RECO_TX_OVERRIDE: Port Role Change overrides the configuration of ETS Recommend TLV transmitstatus: Te 0/54 00:01:11: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Te 0/54 00:01:11: %STKUNIT0-M:CP %DIFFSERV-4-DSM_DCBX_ETS_RECO_TX_OVERRIDE: Port Role Change overrides the configuration of ETS Recommend TLV transmitstatus: Te 0/54 Configure a Host Name The host name appears in the prompt. The default host name is FTOS. • Host names must start with a letter and end with a letter or digit. • Characters within the string can be letters, digits, and hyphens. To configure a host name, follow this steps: Step Task 1 Create a new host name. Figure 4-8 shows the hostname command. Figure 4-8. Configuring a Hostname Default Hostname FTOS(conf)#hostname R1 R1(conf)# New Hostname Command Syntax hostname name Command Mode CONFIGURATION Access the System Remotely You can configure the system to access it remotely by Telnet. The Aggregator has a dedicated management port and a management routing table that is separate from the IP routing table. 28 | Getting Started