Dell PowerEdge XL 5133-4 MXL 10/40GbE Switch IO Module FTOS Command Reference - Page 161

Clearing Interface Counters The counters in the show interfaces command are reset by the clear counters command. This command does not clear the counters captured by any SNMP program. To clear the counters, use the following command in EXEC Privilege mode: Command Syntax clear counters [interface] Command Mode EXEC Privilege Purpose Clear the counters used in the show interface commands for all VRRP groups, VLANs, and physical interfaces or selected ones. Without an interface specified, the command clears all interface counters. • (OPTIONAL) Enter the following interface keywords and slot/ port or number information: • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a Port Channel interface, enter the keyword port-channel followed by a number from 1 to 128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port numbers. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. When you enter this command, you must confirm that you want FTOS to clear the interface counters for that interface (Figure 10-24). Figure 10-24. Clearing an Interface FTOS#clear counters tengig 0/0 Clear counters on TenGigabitEthernet 0/0 [confirm] FTOS# Interfaces | 147