Epson Equity LT User Manual - Page 42
Baud rate, Parity, Data length, SAVE SETTINGS
View all Epson Equity LT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
The cursor block is on the Baud rate option. To change the speed of communication, press Enter. The screen displays the following: 110 bps 150 bps 300 bps 600 bps 1200 bps 2400 bps 4800 bps 9600 bps 19200 bps 38400 bps Use 1 and t to move the cursor block to the desired communication speed and press Enter. To set the type of parity check, press 1 to select Parity and press Enter. The screen displays the following: None Odd Even Use the arrow keys to move the cursor block to the correct type of parity check and press Enter. To change the data length, move the cursor block to Data length and press Enter. The number changes to either 7 or 8, whichever was not displayed before. Press Enter again if you want to reselect the previous number. To change the number of stop bits, move the cursor block to Stop bits and press Enter. The number changes to either 1 or 2, whichever was not displayed before. To reselect the previous number, press Enter again. When you finish changing the serial port settings, move the cursor block to the * * * SAVE SETTINGS * * * option and press Enter. Setting Up Your System 1-27