HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command
HP 6125G Manual
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6125G manual content summary:
- HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 1
HP 6125 Blade Switch Series High Availability Command Reference Part number: 5998-3172 Software version: Release 2103 Document version: 6W100-20120907 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 2
, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 3
Contents Ethernet OAM configuration commands 1 display oam 1 display oam configuration 4 display oam critical-event 6 display oam 26 cfd mep enable 27 cfd meplist 27 cfd mip-rule 28 cfd service-instance 29 cfd service-instance maid format 30 cfd version 31 display cfd linktrace-reply 32 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 4
-vlan 68 reset rrpp statistics 69 ring 70 ring enable 72 rrpp domain 72 rrpp enable 73 rrpp ring-group 73 timer 74 Smart Link configuration commands 76 display smart-link flush 76 display smart-link group 77 flush enable 78 port 78 port smart-link group 79 preemption delay 80 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 5
140 reset bfd session statistics 142 Track configuration commands 143 display track 143 track bfd echo 145 track interface 146 track interface protocol 147 track nqa 148 Support and other resources 150 Contacting HP 150 Subscription service 150 Related information 150 Documents 150 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 6
Ethernet OAM configuration commands display oam Syntax View display oam { local | remote } [ interface interface-type interface-number ] [ | { begin | exclude | include } regular-expression ] Any view Default level 2: System level Parameters local: Displays local Ethernet OAM connection - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 7
. Indicates whether an Ethernet OAM link error is present: 0 for no and 1 for yes. Indicates whether a fatal error is present: 0 for no and 1 for yes. Indicates whether a critical error is present: 0 for no and 1 for yes. Indicates whether the local-to-remote configuration negotiation is complete - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 8
. • UNSATISFIED-The peer end is not satisfied with the local configuration and the negotiation is uncompleted. Packets statistic Statistics for Ethernet OAMPDUs sent and received. OAMPDU Total number of the Ethernet OAMPDUs sent and received. OAMInformation Number of Information OAMPDUs sent - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 9
. For more information, see Table 1. Configuration of the peer Ethernet OAM entity. Ethernet OAM mode. Indicates whether unidirectional transmission is supported (YES or NO). Indicates whether Ethernet OAM remote loopback is supported (YES or NO). Indicates whether Ethernet OAM link error events are - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 10
configuration to display global Ethernet OAM configuration, including the periods and thresholds for Ethernet OAM link error event detection. Related commands interval, which defaults to one second. Errored-frame Event threshold Errored frame event triggering threshold, which defaults to 1. - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 11
] Any view Default level 2: System level Parameters interface interface-type interface-number: Specifies a port by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 12
: Displays peer Ethernet OAM link error event statistics. interface interface-type interface-number: Specifies a port by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 13
-Maximum number of 64-byte frames that can be transmitted through an Ethernet port over the configured error frame period detection interval. For more information, see the "oam errored-frame-period period" command. • Errored Frame Threshold-Error threshold that triggers an error frame period event - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 14
Frame : 3 Error Running Total : 35 Event Running Total : 17 Table 6 Command output Field Port Link Status OAMLocalErrFra meEvent Description Port index. Link status. Information about Syntax oam enable View undo oam enable Layer 2 Ethernet interface view Default level 2: System level 9 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 15
. Use undo oam errored-frame period to restore the default. By default, the errored frame event detection interval is one second. Related commands: oam errored-frame threshold, display oam link-event, and display oam configuration. Examples # Set the errored frame event detection interval to - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 16
threshold. Use undo oam errored-frame threshold to restore the default. By default, the errored frame event triggering threshold is 1. Related commands: oam errored-frame period, display oam link-event, and display oam configuration. Examples # Set the errored frame event triggering threshold to 100 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 17
undo oam errored-frame-period threshold to restore the default. By default, the errored frame period event triggering threshold is 1. Related commands: oam errored-frame-period period, display oam link-event, and display oam configuration. Examples # Set the errored frame period event triggering - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 18
oam errored-frame-seconds threshold to restore the default. By default, the errored frame seconds event triggering threshold is 1. Related commands: oam errored-frame-seconds period, display oam link-event, and display oam configuration. Examples # Set the errored frame seconds event triggering - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 19
. Use undo oam errored-symbol period to restore the default. By default, the errored symbol event detection interval is one second. Related commands: oam errored-symbol threshold, display oam link-event, and display oam configuration. Examples # Set the errored symbol event detection interval to - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 20
system view Default level 2: System level (command in system view) 1: Monitor level (command in user view) Parameters interface-type interface-number: Specifies a port by its type and number. Description Use oam loopback interface to enable Ethernet OAM remote loopback on an Ethernet port. Use - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 21
OAM connection is established and can be performed only by the Ethernet OAM entities operating in active Ethernet OAM mode. Related commands: oam enable, oam loopback, and oam mode. Examples # Configure the active Ethernet OAM mode and enable Ethernet OAM on GigabitEthernet 1/0/1, and then enable - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 22
in the active Ethernet OAM mode. To change the Ethernet OAM mode of an Ethernet OAM-enabled Ethernet port, you need to disable Ethernet OAM on the port first. Related commands: oam enable. Examples # Disable Ethernet OAM on GigabitEthernet 1/0/1, and then configure GigabitEthernet 1/0/1 to operate - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 23
reset oam 18 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 24
CFD configuration commands cfd cc enable Syntax cfd cc service-instance instance-id mep mep-id enable View undo cfd cc service-instance instance-id mep mep-id enable Layer 2 Ethernet interface view Default level 2: System level Parameters service-instance instance-id: Specifies the service - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 25
seconds Related commands: cfd cc enable. Examples # Set the value of the interval field in CCMs sent by MEPs in service instance 2 to 7. system-view [Sysname] cfd cc interval 7 service-instance 2 cfd enable Syntax cfd enable View undo cfd enable System view Default level 2: System - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 26
ttl-value ] [ hw-only ] Any view Default level 0: Visit level Parameters service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767. between the two and detection of the responding LTRs. Related commands: cfd linktrace auto-detection. Examples # Identify the path - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 27
service-instance 1 mep 1101 target-mep 2001 Linktrace to MEP 2001 with the sequence number 1101-43361 : MAC Address TTL Forwarded Relay Action 0010-FC00-6512 63 No None NOTE: The output varies by CFD protocol version. Table 8 Command System view Default level 2: System level 22 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 28
the content stored in the buffer will be removed. Related commands: cfd linktrace. Examples # Enable automatic LT messages sending, } [ number number ] Any view Default level 0: Visit level Parameters service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 29
is 0010-FC00-6512) in service instance 1 (assume that the link status is normal). cfd loopback service-instance 1 mep 1101 target- : Request timed out Send:5 Received:0 Lost:5 Table 9 Command output Field Loopback to 0010-FC00-6512 with the sequence Default level 2: System level 24 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 30
of the VLAN where MA is in service, ranging from 1 to 4094. default, no MA is created. Before creating an MA, you must create an MD first. The total length of the MA and MD names should not exceed 44 characters. Deleting an MA also deletes the configurations related to that MA. Related commands - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 31
. By default, no MEP exists on a port. In creating a MEP, the service instance you specified defines the MD and MA that the MEP belongs to. You cannot create a MEP if the MEP ID is not included in the MEP list of the relevant service instance. Related commands: cfd meplist. Examples # Configure - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 32
Layer 2 Ethernet interface view Default level 2: System level Parameters service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767. mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191. Description Use cfd mep enable to enable the MEP configured on a port - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 33
MA. Use undo cfd meplist to delete existing MEP lists. By default, no MEP list is created. Before creating a MEP list, create the relevant MD, MA, and service instance. After you delete a MEP list, all local MEP configurations based on this list are deleted. Related commands: cfd ma, cfd md, and cfd - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 34
, no rules for generating MIPs are configured and no MIPs exist. Examples # Configure the MIP generation rule as default in service instance 5. system-view [Sysname] cfd mip-rule default service-instance 5 cfd service-instance Syntax cfd service-instance instance-id md md-name ma ma - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 35
the MA and MD for the service instance. The service instance ID, MA name, and MD level uniquely identify a MA. Deleting a service instance also deletes all configurations based on the service instance. Deleting a service instance removes not only the service instance ID-MA association, but also - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 36
draft5.2 interim version), however, you can switch between the draft5.2 version and draft5.2 interim version. This restriction does not apply to the device without an MD configured. Related commands: cfd md and cfd service-instance maid format. Examples # Configure the CFD protocol version as IEEE - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 37
-id: Specifies the service instance ID, ranging from 1 to 32767. mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 38
TTL Forwarded 63 No Relay Action None NOTE: The output varies by CFD protocol version. Table 10 Command output Field Service instance MEP ID MAC Address TTL Last MAC Forwarded Description Service instance to which the MEPs that send LTMs belong. ID of the MEP that sends LTMs. Source MAC - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 39
] Any view Default level 1: Monitor level Parameters size size-value: Specifies the times of recent auto-detections, ranging from 1 to 100. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 40
Yes Found 00E0-FC00-6510 62 Yes Found 00E0-FC52-BAA0 61 No None Service instance: 2 Target MEP ID: 2025 MAC Address 00E0-FC27-6502 MEP ID Yes Found 00E0-FC00-6510 62 Yes Found 00E0-FC52-BAA0 61 No None Service instance: 2 Target MEP ID: 2025 MAC Address 00E0-FC27-6502 MEP ID - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 41
protocol version. Table 11 Command output Field Service instance MEP ID Time Target MEP ID TTL MAC Address TTL Last MAC Forwarded Relay Action Description Service instance to which the MEPs } ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level 36 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 42
|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: (s) belong(s) to this maintenance domain: Maintenance association: matest_6 Service instance: 6 VLAN: 6 Level: 6 Maintenance domain: - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 43
begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 44
ranging from 1 to 8191. service-instance instance-id: Specifies a service instance by its ID, ranging from 1 to 32767. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 45
:34 Some other MEPs are transmitting the RDI bit. Table 14 Command output Field Interface Maintenance domain Maintenance association Level VLAN Direction Administrative state FNG_RESET • FNG_DEFECT • FNG_REPORT_DEFECT • FNG_DEFECT_REPORTED • FNG_DEFECT_CLEARING A hyphen (-) means not supported. 40 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 46
last-received CCM: Some other MEPs are transmitting the RDI bit. Description Information related to CCM. State of CCMs sent: • CCI_IDLE • CCI_WAITING A hyphen (-) means not supported. Interval to send CCM. Number of CCMs that have been sent by the MEPs. A hyphen (-) means not - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 47
view Default level 1: Monitor level Parameters service-instance instance-id: Specifies a service instance by its ID, ranging from 1 to 32767. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 48
GigabitEthernet1/0/4 VLAN 1 MEP ID: 9 Level: 6 Service instance: 6 Maintenance domain: mdtest6 Maintenance association: matest6 Table 15 Command output Direction: Outbound Field Interface GigabitEthernet1/0/1 VLAN 100 MEP ID MIP Description MP configuration of the specified VLAN on the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 49
id: Specifies the service instance ID, ranging from 1 to 32767. mep mep-id: Specifies the ID of a remote MEP, ranging from 1 to 8191. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 50
hyphen (-) means not supported. Running state of Default level 1: Monitor level Parameters instance-id: Service instance ID, ranging from 1 to 32767. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 51
matest_6 Level: 6 VLAN: 6 MIP rule: None MEP ID: 731 Interface: GigabitEthernet1/0/2 Table 17 Command output CCM interval: 1s Direction: Outbound Field 2 service instance(s) are configured. Service instance 5 Maintenance domain Maintenance association: Level VLAN MIP rule CCM interval MEP ID - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 52
AIS (enabled or disabled). NOTE: This Switch Series does not support AIS. Examples # Display the status of Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 53
Table 18 Command output Field The current CFD version is draft5 The current CFD version is draft5-plus The current CFD version is standard Description Indicates that the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 54
] Any view Default level 1: Monitor level Parameters interface-type interface-number: Specifies a port by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 55
: 12 # Display the DLDP configuration of GigabitEthernet 1/1/3. display dldp Command output Field DLDP global status DLDP interval DLDP work-mode DLDP authentication-mode password Password for DLDP authentication, which is displayed as asterisks (******). Port shutdown mode (auto or manual - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 56
] Any view Default level 1: Monitor level Parameters interface-type interface-number: Specifies a port by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 57
failed packets received : 0 Valid packets received : 3 Table 20 Command output Field Description Interface Port index Packets sent Total number of DLDP none | { md5 | simple } password } View undo dldp authentication-mode System view Default level 2: System level Parameters none: Specifies - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 58
passwords, including passwords configured in plain text, are saved in cipher text. Examples # Configure the simple authentication mode and set the plaintext password the default. By default, the setting of the DelayDown timer is 1 second. The DelayDown timer configured by using this command applies - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 59
enable DLDP. Use undo dldp enable to disable DLDP. By default, DLDP is disabled both globally and on each port. When executed in system view, this command takes effect globally. When executed in Layer 2 Ethernet interface view, this command takes effect on the current port. DLDP can take effect - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 60
Ethernet interface view Default level 2: System level Parameters None Description Use dldp reset to reset the DLDP state for ports, enabling DLDP down ports to perform unidirectional link detection. When executed in system view, this command -shutdown { auto | manual } View undo dldp - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 61
Default level 2: System level Parameters auto: Configures the port shutdown mode as auto mode, where, when a unidirectional link is detected, the port involved is shut down by DLDP. manual: Configures the port shutdown mode as manual mode, where, when a unidirectional link is detected, DLDP - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 62
interface-number ] User view Default level 1: Monitor level Parameters interface-type interface-number: Specifies a port by its type and number. Description Use reset dldp statistics to clear DLDP packets statistics passing through a port. If no port is specified, this command clears the DLDP - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 63
RRPP configuration commands control-vlan Syntax control-vlan vlan-id View undo control-vlan RRPP domain view Default level 2: System have not been assigned yet. To ensure proper forwarding of RRPPDUs, do not configure the default VLAN of a port accessing an RRPP ring as the control VLAN, or - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 64
begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 65
. Multiple Spanning Tree Instances (MSTIs) are displayed here. To get the VLANs corresponding to these MSTIs, use the display stp region-configuration command. Hello Timer value in seconds. Fail Timer value in seconds. RRPP ring ID. RRPP ring level • 0 representing primary ring. • 1 representing - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 66
View Any view Default level 1: Monitor Level Parameters ring-group-id: RRPP ring group ID, which ranges from 1 to 8. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 67
view Default level 1: Monitor level Parameters domain-id: RRPP domain ID, which ranges from 1 to 8. ring-id: RRPP ring ID, which ranges from 1 to 64. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 68
Direct Hello Down Flush FDB Flush FDB Hello Fault Total Send 0 0 0 0 0 0 0 Rcv 16378 0 0 1 0 0 16379 # Display the RRPPDU statistics for all rings in RRPP domain 2. display rrpp statistics domain 2 Ring ID : 1 Ring Level : 0 Node Mode : Master Active Status : - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 69
Table 23 Command output Field Ring ID Ring Level Node Mode Active Status Primary Port field means the node mode is master node or transit node. A hyphen (-) appears when the port is not configured on the ring or the board to which the port belongs does not start. The secondary port field means the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 70
Default level 1: Monitor level Parameters domain-id: RRPP domain ID, which ranges from 1 to 8. ring-id: RRPP ring ID, which ranges from 1 to 64. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 71
protected by the RRPP domain. MSTIs are displayed here. To get the VLANs corresponding to these MSTIs, use the display stp region-configuration command. Hello Timer value in seconds. Fail Timer value in seconds. RRPP ring ID. RRPP ring level: • 0 representing primary ring. • 1 representing subring - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 72
of the following cases: • The ring is inactive. • The port is not configured on the ring. • The board to which the port belongs does not start. undo domain domain-id [ ring ring-id-list ] RRPP ring group view Default level 2: System level Parameters domain-id: RRPP domain ID, which ranges from - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 73
command to display the instance-to-VLAN mappings. Description Use protected-vlan to configure the protected VLANs for the RRPP domain. Use undo protected-vlan to remove the protected VLAN configuration of the RRPP domain. By default, no protected VLAN is specified for an RRPP domain. 68 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 74
-MSTI mappings change, the protected VLANs of an RRPP domain also changes according to the MSTIs configured for the domain. Related commands: rrpp domain; display stp region-configuration (Layer 2-LAN Switching Command Reference). Examples # Map VLANs 1 through 30 to MSTI 1, activate the MST region - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 75
ring ring-id RRPP domain view Default level 2: System level Parameters ring- be a Layer-2 Ethernet port or Layer-2 aggregate configurations before deleting the primary ring configuration of the edge node or the assistant-edge node. However, an active RRPP ring cannot be deleted. Related command - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 76
system-view [Sysname] rrpp domain 1 [Sysname-rrpp-domain1] control-vlan 100 [Sysname-rrpp-domain1] protect-vlan reference-instance 0 1 2 [Sysname-rrpp-domain1] ring 10 node-mode master primary-port gigabitethernet 1/0/1 secondary-port gigabitethernet 1/0/2 level 0 # Specify the device as - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 77
ring-id enable View undo ring ring-id enable RRPP domain view Default level 2: System level Parameters ring-id: RRPP ring ID, which , enable the RRPP protocol and the RRPP rings for the RRPP domain. Related commands: rrpp enable. Examples # Enable RRPP ring 10 in RRPP domain 1. - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 78
domain to remove an RRPP domain. Deleting an RRPP domain also removes the configurations of the control VLANs and protected VLANs. To delete an RRPP domain successfully, make sure it has no RRPP rings. Related commands: control-vlan and protected-vlan. Examples # Create RRPP domain 1, and enter RRPP - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 79
configured with ring groups cannot interoperate with RRPP that does not support ring group configuration any ring group. Related commands: domain ring and configure the Hello timer value and the Fail timer value for the RRPP domain. Use undo timer to restore it to the default value. By default - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 80
The Fail timer value must be greater than or equal to three times the Hello timer value. Examples # Set the Hello timer value to 2 seconds and the Fail timer value to 7 seconds. system-view [Sysname] rrpp domain 1 [Sysname-rrpp-domain1] timer hello-timer 2 fail-timer 7 75 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 81
begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 82
from 1 to 26. all: Displays information about all smart link groups. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 83
undo flush enable to disable flush update. By default, flush update is enabled for smart link groups and VLAN 1 is used for flush message transmission. Configure different control VLANs for different smart link groups. Related commands: smart-link flush enable. Examples # Disable flush update - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 84
to an aggregation group or service loopback group. You can assign a port to a smart link group with the port smart-link group command in Layer 2 Ethernet interface view or Layer 2 aggregate interface view. Related commands: port smart-link group. Examples # Configure GigabitEthernet 1/0/1 as the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 85
service loopback group. You can assign a port to a smart link group with the port command in smart link group view. Related commands: port. Examples # Configure delay-time View undo preemption delay Smart link group view Default level 2: System level Parameters delay-time: Preemption delay (in - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 86
of upstream devices. Use undo preemption delay to restore the default. By default, the preemption delay is 1 second. The preemption delay configuration takes effect only after role preemption is enabled. Related commands: preemption mode. Examples # Enable role preemption and set the preemption - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 87
id-list ] Smart link group view Default level 2: System level Parameters reference-instance commands: smart-link group; display stp region-configuration (Layer 2-LAN Switching Command Reference). Examples # Map VLANs 1 through 30 to MSTI 1, activate the MST region configuration, and configure - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 88
smart-link flush enable to configure a receive control VLAN-a VLAN for receiving flush messages. Use undo smart-link flush enable to disable flush message processing. By default, flush messages are not processed. If no VLAN is specified, VLAN 1 applies. Do not use this command on the member port of - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 89
-Aggregation1] smart-link flush enable smart-link group Syntax smart-link group group-id View undo smart-link group group-id System view Default level 2: System level Parameters group-id: Smart link group ID, which ranges from 1 to 26. Description Use smart-link group to create a smart - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 90
to 16. all: Displays information about all monitor link groups. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 91
link group group-id View undo monitor-link group group-id System view Default level 2: System level Parameters group-id: Monitor link group ID, which Use undo monitor-link group to remove a monitor link group. Related commands: port monitor-link group and port. Examples # Create monitor link - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 92
command in Layer 2 Ethernet interface view or Layer 2 aggregate interface view. Related commands: port monitor-link group. Examples # Create monitor link group 1, and configure group group-id Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 93
Examples # Create monitor link group 1, and configure GigabitEthernet 1/0/1 as an uplink port and GigabitEthernet 1/0/2 as a downlink port for monitor link group 1. system-view [Sysname] monitor-link group 1 [Sysname-mtlk-group1] quit [ - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 94
refers to both routers and Layer 3 switches. • The term interface in the VRRP feature refers to VLAN interfaces. Common VRRP configuration commands vrrp mode Syntax vrrp mode load-balance View undo vrrp mode System view Default level 2: System level Parameters load-balance: Specifies - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 95
VRRP group by its group number, which ranges from 1 to 255. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 96
Vlan2 1 Master 140 1 Table 28 Command output (standard protocol mode) Simple 1.1.1.1 Field Run Mode group. Running priority of the router (the current priority of the router). With VRRP tracking configured, when the state of the monitored interface or track entry changes, the priority of the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 97
of the router, or in other words, the priority value specified by using the vrrp vrid priority command. Running priority of the router (the current priority of the router). With VRRP tracking configured, when the state of the monitored interface or track entry changes, the priority of the router - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 98
to negative. It is displayed only when the vrrp vrid track interface command or the vrrp vrid track command is executed. Switchover mode. When the status of the monitored track entry turns to negative, the backup immediately switches to the master. # When VRRP operates in load balance mode, display - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 99
VRID is number, this field indicates the running priority of the router, or in other words, the current priority of the router. With VRRP tracking configured, if the state of the monitored interface or track entry changes, the priority of the router changes. • If the VRID is VF number, this field - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 100
: Track Object : 2 State : Positive Member IP : 10.1.1.3 Table 31 Command output (load balancing mode) Pri Reduced : 50 Weight Reduced : 250 Field in the VRRP group: • Master • Backup • Initialize Configured priority of the router (the priority value specified by using the vrrp vrid priority - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 101
router (the current priority of the router). With VRRP tracking configured, if the state of the monitored interface or track entry command or the vrrp vrid track command is executed. Switchover mode. When the status of the monitored track entry turns to negative, the backup immediately switches - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 102
is displayed as local. Weight track configuration of the VF. It is displayed only when the vrrp vrid weight track command is executed. Weight track entry. It command is executed. A track entry has the following states: • Invalid • Negative • Positive • Not existing IP address of the member switch. - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 103
begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters interface interface-type interface-number: |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 104
VF Priority Zero Pkts Sent : 0 Status Option Errors : 0 Global statistics CheckSum Errors : 0 Version Errors : 0 VRID Errors : 0 Table 32 Command output (Standard protocol mode) Field Interface VRID CheckSum Errors Version Errors Invalid Type Pkts Rcvd Advertisement Interval Errors IP TTL - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 105
number of packets with checksum errors Total number of packets with version errors Total number of packets with VRID errors Table 33 Command output (Load balancing mode) Field Interface VRID CheckSum Errors Version Errors Invalid Type Pkts Rcvd Advertisement Interval Errors IP TTL Errors Auth - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 106
interface-number [ vrid virtual-router-id ] ] User view Default level 1: Monitor level Parameters interface interface-type interface- If you specify both an interface and a VRRP group, the command clears the statistics about the specified VRRP group on the specified interface. If you - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 107
2: System level Parameters dscp-value: Sets the Differentiated Services Code Point (DSCP) value for VRRP packets, in the range of 0 to 63. Description Use vrrp dscp to set the DSCP value for VRRP packets. Use undo vrrp dscp to restore the default. By default, the DSCP value in VRRP packets is 48 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 108
ttl View undo vrrp un-check ttl Interface view Default level 2: System level Parameters None Description Use vrrp sets the packet TTL to 255. After you configure to check the VRRP packet TTL, when the this case, use the vrrp un-check ttl command to disable TTL check on VRRP packets. Examples - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 109
vrrp vrid authentication-mode to restore the default. By default, authentication is disabled. For secrecy, all keys, including keys configured in plain text, are saved in cipher text. Before executing the command, create a VRRP group on an interface and configure the virtual IP address of the VRRP - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 110
vrid preempt-mode timer delay to restore the default preemption delay. By default, the router operates in preemptive mode and command, create a VRRP group on an interface and configure the virtual IP address of the VRRP group. Related commands: display vrrp. Examples # Enable preemption on the switch - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 111
in the specified VRRP group. Use undo vrrp vrid priority to restore the default. By default, the priority of a router in a VRRP group is 100. • Before executing the command, create a VRRP group on an interface and configure the virtual IP address of the VRRP group. • The role that a router plays - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 112
to the negative state. You can use the display vrrp verbose command to view the IP addresses of VFs. reduced priority-reduced: Reduces association between the VRRP group and any track entry is removed. By default, a VRRP group is not associated with any track entry. When the configuration. 107 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 113
group. For more information about configuring track entries, see High Availability Configuration Guide. Related commands: vrrp vrid track interface and display track [ interface interface-type interface-number ] Interface view Default level 2: System level Parameters virtual-router-id: VRRP group - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 114
the uplink failure. This problem can be solved through tracking a specified uplink interface. After you configure to monitor the uplink interface Before executing the command, create a VRRP group on an interface and configure the virtual IP address of the VRRP group. If you configure an interface to - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 115
track to remove the specified track entry. By default, no track entry is specified to be monitored. • The command is effective only when VRRP operates in load balancing mode. • Before executing the command, create a VRRP group on an interface and configure the virtual IP address of the VRRP group - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 116
entry, and then create the track entry using the track command. • By default, the weight of a VF is 255, and the lower more information about track entries, see High Availability Configuration Guide. Related commands: display vrrp. Examples # Configure to monitor track entry 1, making the weights of - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 117
Type IP Vlan2 1 Master 140 100 Simple FE80::1 Table 34 Command output (standard protocol mode) Field Run Mode Run Method Total number of the router (the current priority of the router). With VRRP tracking configured, when the state of the monitored interface or track entry changes, the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 118
DOWN State Status of the router in the VRRP group: • Master • Backup • Initialize Config Pri Configured priority of the router (the priority value specified by using the vrrp ipv6 vrid priority command). Running Pri Running priority of the router (the current priority of the router). With VRRP - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 119
is displayed only when the vrrp ipv6 vrid track interface or vrrp ipv6 vrid track command is executed. Switchover mode. If the status of the monitored track entry turns to negative, the backup immediately switches to the master. # When VRRP operates in load balancing mode, display brief information - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 120
1 Master 140 VF 1 Active 255 Table 36 Command output (load balancing mode) FE80::1 000f-e2ff-4011 • If VRID is VF number, this field indicates the running priority of the VF. With VF tracking configured, when the state of the monitored track entry changes, the priority of the VF changes. • If - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 121
Track Information: Track Object : 1 State : Positive Forwarder Switchover Track Information: Track Object : 2 State : Positive Member IP : FE80::2 Table 37 Command output (load balancing mode) Pri Reduced : 10 Pri Reduced : 50 Weight Reduced : 250 Field Run Mode Run Method Total number of - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 122
state: • UP • DOWN Status of the router in the VRRP group: • Master • Backup • Initialize Configured priority of the router (the priority value specified by using the vrrp ipv6 vrid priority command). Running priority of the router, or in other words, the current priority of the router. With VRRP - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 123
or the vrrp ipv6 vrid track command is executed. Switchover mode. When the status of the monitored track entry turns to negative, the backup immediately switches to the master. Number of VFs of the router is 2, and the number of AVFs is 1. Configured weight of the VF, the value is 255. Running - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 124
AVF is on the specified member switch, the LVF immediately becomes active. } regular-expression ] Any view Default level 1: Monitor level Parameters interface command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 125
the statistics about all the VRRP groups on the router. To clear the VRRP group statistics, use the reset vrrp ipv6 statistics command. Related commands: reset vrrp ipv6 statistics. Examples # When VRRP operates in standard protocol mode, display the statistics about all VRRP groups. - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 126
number of packets with checksum errors Total number of packets with version errors Total number of packets with VRID errors Table 39 Command output (load balancing mode) Field Interface VRID CheckSum Errors Version Errors Invalid Type Pkts Rcvd Advertisement Interval Errors Hop Limit Errors Auth - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 127
number of packets with VRID errors reset vrrp ipv6 statistics Syntax View reset vrrp ipv6 statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ] User view Default level 1: Monitor level 122 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 128
on the router. Related commands: display vrrp ipv6 statistics. Examples # Clear the statistics about all the VRRP groups on the router. reset vrrp ipv6 statistics vrrp ipv6 dscp Syntax vrrp ipv6 dscp dscp-value View undo vrrp ipv6 dscp System view Default level 2: System level - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 129
By default, the virtual MAC addresses are mapped to the virtual IP addresses of the VRRP groups. Specify the type of the MAC addresses mapped to the virtual IPv6 addresses before creating a VRRP group. Otherwise, you cannot change the type of the MAC address by using this command. When VRRP operates - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 130
ipv6 vrid authentication-mode to restore the default. By default, authentication is disabled. For secrecy, all keys, including keys configured in plain text, are saved in cipher text. Before executing the command, create a VRRP group on an interface and configure the virtual IP address of the VRRP - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 131
the specified VRRP group. Use undo vrrp ipv6 vrid priority to restore the default. By default, the priority of a router in a VRRP group is 100. Before executing the command, create a VRRP group on an interface and configure the virtual IPv6 address of the VRRP group. The role that a router plays - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 132
vrrp ipv6 vrid timer advertise to restore the default. By default the Adver_Timer is 100 centiseconds. The Adver_Timer controls the interval at which the master sends VRRP packets. Before executing the command, create a VRRP group on an interface and configure the virtual IPv6 address of the VRRP - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 133
between the VRRP group and any track entry is removed. By default, an IPv6 VRRP group is not associated with any track command before or after you associate it with an IPv6 VRRP group. For more information about configuring track entries, see High Availability Configuration Guide. Related commands - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 134
interface-number ] Interface view Default level 2: System level Parameters networks because of the uplink failure. This problem can be solved by the tracking a specified command, create a VRRP group on an interface and configure the virtual IPv6 address of the VRRP group. If you configure - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 135
existing VRRP group or the virtual IPv6 address of the VRRP group. By default, no VRRP group is created. The first virtual IPv6 address assigned to a must be removed the last. Related commands: display vrrp ipv6. Examples # Create VRRP group 1, and configure its virtual IPv6 address as fe80::10 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 136
by which the weight decreases, in the range of 1 to 255. The default setting is 30. Description Use vrrp ipv6 vrid weight track to specify the about track entries, see High Availability Configuration Guide. Related commands: display vrrp ipv6. Examples # Configure to monitor track entry 1, making - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 137
[Sysname] interface vlan-interface 2 [Sysname-Vlan-interface2] vrrp ipv6 vrid 1 virtual-ip fe80::2 link-local [Sysname-Vlan-interface2] vrrp ipv6 vrid 1 weight track 1 reduced 50 132 - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 138
configuration commands bfd authentication-mode Syntax bfd authentication-mode { md5 key-id [ cipher ] key | sha1 key-id [ cipher ] key | simple key-id [ cipher ] password } View undo bfd authentication-mode Interface view Default Examples # Configure VLAN-interface 1 to support MD5 authentication, - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 139
, in the range of 3 to 50. Description Use bfd detect-multiplier to configure the detection time multiplier. Use undo bfd detect-multiplier to restore the default. The default is 5. Examples # Configure the detection time multiplier as 6 on VLAN-interface 1. system-view [Sysname - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 140
. Use undo bfd min-echo-receive-interval to restore the default minimum echo packet receiving interval on the interface. By default, the minimum echo packet receiving interval is 400 milliseconds Examples # Configure the minimum echo receiving interval on VLAN-interface 1 as 500 milliseconds - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 141
to 1000. Description Use bfd min-receive-interval to configure the minimum interval for receiving BFD control packets. Use undo bfd min-receive-interval to restore the default minimum interval for receiving BFD control packets. By default, the minimum interval for receiving BFD control packets is - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 142
BFD control packets as 3784 or 4784. Use undo bfd multi-hop destination-port to restore the default. By default, the destination port number for multi-hop BFD control packets is 4784. Examples # Configure the destination port number for multi-hop BFD control packets as 3784. system-view - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 143
bfd debugging-switches [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 144
regular-expression ] Any view Default level 1: Monitor level Parameters verbose: Displays detailed interface information. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 145
about all BFD sessions on the IRF member switch, including those not maintained by the switch. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 146
Display detailed information about the BFD sessions maintained by the switch. display bfd session verbose Total session number 02:36 Connect Type: Direct Protocol: OSPF Diag Info: No Diagnostic Table 41 Command output Remote Discr: 2 Destination IP: 192.168.12.10 Interface: Vlan- - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 147
. Expected minimum transmit interval configured on the interface. Expected minimum receive interval configured on the interface. Actual transmit number ] User view Default level 1: Monitor level Parameters slot slot-number: Clears session statistics about the specified IRF member switch. The - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 148
of 1 to 1024. all: Displays information about all the track entries. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 149
20, Negative 30 (in seconds) Reference object: Track interface : Interface status : Inserted Interface : Vlan-interface3 Protocol : IPv4 Table 42 Command output Field Track ID Status notify 13 seconds later Duration Notification delay: Positive 20, Negative 30 (in seconds) Reference object - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 150
of the track entry changes. Use undo track to remove the track entry. By default, no track entry exists. After a track entry is created, you cannot change its for this track entry, use the track bfd echo delay command. To modify other settings of this track entry, first delete the entire track entry, - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 151
BFD, do not configure the virtual IP address of a VRRP group as the local or remote address of a BFD session. Related commands: display track. the track entry changes. Use undo track to remove the track entry. By default, no track entry to be associated with the physical status of a specific - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 152
ip interface brief command. Related commands: display track; display ip interface brief (Layer 3-IP Services Command Reference). Examples # positive-time } * ] undo track track-entry-number View System view Default level 2: System level Parameters track-entry-number: Specifies a track entry ID - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 153
commands: display track; display ip interface brief (Layer 3-IP Services Command Reference); display ipv6 interface (Layer 3-IP Services Command positive-time } * ] undo track track-entry-number View System view Default level 2: System level Parameters track-entry-number: Specifies a track entry ID - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 154
By default, no track entry exists. After a track entry is created, you cannot change its settings except the delay time. To change the delay time, use the track nqa delay command. To modify other settings of this track entry, first delete the entire track entry, and then create a new track entry. - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 155
HP A-Series Acronyms. Websites • HP.com http://www.hp.com • HP Networking http://www.hp.com/go/networking • HP manuals http://www.hp.com/support/manuals • HP download drivers and software http://www.hp.com/support/downloads • HP software depot http://www.software.hp.com • HP Education http://www.hp - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 156
Command conventions Convention Boldface Italic [ ] { x | y | ... } [ x | y | ... ] { x | y | ... } * [ x | y | ... ] * & # Description Bold text represents commands and menu items are in bold text. For example, the New User window appears; click OK. Multi-level menus are separated by angle - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 157
, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features. Port numbering in examples The port numbers in this document are for - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 158
service-instance,29 cfd service-instance maid format,30 cfd version,31 control-vlan,58 D display bfd debugging-switches, service-instance,45 display cfd status,46 display cfd version,47 display dldp,49 display dldp statistics,51 display monitor-link group,85 display oam,1 display oam configuration - HP 6125G | HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 159
oam errored-frame threshold,10 oam errored-frame-period period,11 oam errored-frame-period threshold,12 oam errored-frame-seconds period,12 oam errored-frame-seconds threshold,13 oam errored-symbol period,13 oam errored-symbol threshold,14 oam loopback,14 oam loopback interface,15 oam loopback
HP 6125 Blade Switch Series
High Availability
Command Reference
Part number: 5998-3172
Software version: Release 2103
Document version: 6W100-20120907