HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 60
dldp reset, dldp unidirectional-shutdown
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Use undo dldp interval to restore the default. By default, the interval for sending Advertisement packets is five seconds. This command applies to all DLDP-enabled ports. Examples # Set the interval for sending Advertisement packets to 20 seconds. system-view [Sysname] dldp interval 20 dldp reset Syntax View dldp reset System view, Layer 2 Ethernet interface view Default level 2: System level Parameters None Description Use dldp reset to reset the DLDP state for ports, enabling DLDP down ports to perform unidirectional link detection. When executed in system view, this command applies to all ports of the device. When executed in Layer 2 Ethernet interface view, this command applies to the current port. Related commands: dldp enable and dldp unidirectional-shutdown. Examples # Reset DLDP state for all ports. system-view [Sysname] dldp reset # Reset DLDP state for port GigabitEthernet 1/1/3. system-view [Sysname] interface gigabitethernet 1/1/3 [Sysname-GigabitEthernet1/1/3] dldp reset dldp unidirectional-shutdown Syntax dldp unidirectional-shutdown { auto | manual } View undo dldp unidirectional-shutdown System view 55