HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 84
port smart-link group
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
View undo port interface-type interface-number Smart link group view Default level 2: System level Parameters interface-type interface-number: Specifies a port by its type and number. master: Specifies a port as the master port. slave: Specifies a port as the slave port. Description Use port to configure the specified port as the master or slave port of the current smart link group. Use undo port to remove the specified port from the smart link group. Disable the spanning tree feature and RRPP on the ports you want to add to the smart link group, and make sure the ports are not member ports of any aggregation group or service loopback group. On the other hand, you cannot enable the spanning tree feature or RRPP on a smart link group member port or assign a smart link group member port to an aggregation group or service loopback group. You can assign a port to a smart link group with the port smart-link group command in Layer 2 Ethernet interface view or Layer 2 aggregate interface view. Related commands: port smart-link group. Examples # Configure GigabitEthernet 1/0/1 as the slave port of smart link group 1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] undo stp enable [Sysname-GigabitEthernet1/0/1] quit [Sysname] smart-link group 1 [Sysname-smlk-group1] protected-vlan reference-instance 0 [Sysname-smlk-group1] port gigabitethernet 1/0/1 slave port smart-link group Syntax port smart-link group group-id { master | slave } View undo port smart-link group group-id Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters group-id: Smart link group ID, which ranges from 1 to 26. 79