HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 141

bfd min-transmit-interval

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 141 highlights

Parameters value: Minimum interval for receiving BFD control packets, in milliseconds. The value must be a multiple of 100 and range from 200 to 1000. Description Use bfd min-receive-interval to configure the minimum interval for receiving BFD control packets. Use undo bfd min-receive-interval to restore the default minimum interval for receiving BFD control packets. By default, the minimum interval for receiving BFD control packets is 400 milliseconds. If the remote device sends BFD control packets at an interval shorter than the minimum receiving interval of the local device, the remote device changes its sending interval to the minimum receiving interval of the local device. Examples # Configure the minimum interval for receiving BFD control packets on VLAN-interface 1 as 500 milliseconds. system-view [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] bfd min-receive-interval 500 bfd min-transmit-interval Syntax bfd min-transmit-interval value View undo bfd min-transmit-interval Interface view Default level 2: System level Parameters value: Minimum interval for transmitting BFD control packets, in milliseconds. The value must be a multiple of 100 and range from 200 to 1000. Description Use bfd min-transmit-interval to configure the minimum interval for transmitting BFD control packets. Use undo bfd min-transmit-interval to restore the default minimum interval for transmitting BFD control packets. By default, the minimum interval for transmitting BFD control packets is 400 milliseconds. A proper interval ensures that BFD control packets are not transmitted faster than the device can deal with. The actual interval for transmitting BFD control packets at the local device should be the greater between the minimum interval for sending BFD control packets configured on the local interface and the minimum interval for receiving BFD control packets on the remote device. 136

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
136
Parameters
value
: Minimum interval for receiving BFD control packets, in milliseconds. The value must be a multiple
of 100 and range from 200 to 1000.
Description
Use
bfd min-receive-interval
to configure the minimum interval for receiving BFD control packets.
Use
undo
bfd min-receive-interval
to restore the default minimum interval for receiving BFD control
packets.
By default, the minimum interval for receiving BFD control packets is 400 milliseconds.
If the remote device sends BFD control packets at an interval shorter than the minimum receiving interval
of the local device, the remote device changes its sending interval to the minimum receiving interval of
the local device.
Examples
# Configure the minimum interval for receiving BFD control packets on VLAN-interface 1 as 500
milliseconds.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] bfd min-receive-interval 500
bfd min-transmit-interval
Syntax
bfd min-transmit-interval
value
undo
bfd min-transmit-interval
View
Interface view
Default level
2: System level
Parameters
value
: Minimum interval for transmitting BFD control packets, in milliseconds. The value must be a
multiple of 100 and range from 200 to 1000.
Description
Use
bfd min-transmit-interval
to configure the minimum interval for transmitting BFD control packets.
Use
undo
bfd min-transmit-interval
to restore the default minimum interval for transmitting BFD control
packets.
By default, the minimum interval for transmitting BFD control packets is 400 milliseconds.
A proper interval ensures that BFD control packets are not transmitted faster than the device can deal with.
The actual interval for transmitting BFD control packets at the local device should be the greater between
the minimum interval for sending BFD control packets configured on the local interface and the minimum
interval for receiving BFD control packets on the remote device.