HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 145
display bfd session
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Table 40 Command output Field Interface Session Num Min Trans Inter Min Recv Inter DetectMult Min Echo Recv Inter Auth mode LD RD SourceAddr DestAddr ConnType State Mode Description Interface name. Number of sessions established on the local interface. Minimum control packet transmit interval configured on the interface. Minimum control packet receive interval configured on the interface. Detection time multiplier. Minimum echo packet receive interval configured on the interface. Session authentication mode: simple, MD5, SHA-1, or none. Local ID of the session. Remote ID of the session. Source IP address of the session. Destination IP address of the session. Connection type of the interface. Session state. Working mode of the session: control (Ctrl) mode or echo (Echo) mode. display bfd session Syntax View display bfd session [ slot slot-number [ all | verbose ] | verbose ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters verbose: Displays detailed session information. slot slot-number: Displays session information for the specified IRF member switch. The slot-number argument represents the IRF member ID of the device. If no member switch is specified, the command displays session information for all IRF member switches. all: Displays detailed information about all BFD sessions on the IRF member switch, including those not maintained by the switch. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. 140