HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 70

View Any view Default level 1: Monitor level Parameters domain-id: RRPP domain ID, which ranges from 1 to 8. ring-id: RRPP ring ID, which ranges from 1 to 64. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display rrpp verbose to display detailed RRPP information. If an RRPP ring ID is specified, this command displays the detailed information of the specified ring in the specified RRPP domain. Otherwise, this command displays the detailed information of all the rings in the specified RRPP domain. Examples # Display the detailed information of ring 1 in RRPP domain 1. display rrpp verbose domain 1 ring 1 Domain ID : 1 Control VLAN : Major 5 Sub 6 Protected VLAN: Reference Instance 0 to 2, 4 Hello Timer : 1 sec Fail Timer : 3 sec Ring ID : 1 Ring Level : 1 Node Mode : Master Ring State : Complete Enable Status : Yes Active Status: Yes Primary port : GE1/0/1 Port status: UP Secondary port: GE1/0/2 Port status: BLOCKED # Display the detailed information of all the rings in RRPP domain 2. display rrpp verbose domain 2 Domain ID : 2 Control VLAN : Major 10 Sub 11 Protected VLAN: Reference Instance 3, 5 to 7 Hello Timer : 1 sec Fail Timer : 3 sec Ring ID Ring Level Node Mode Ring State : 1 : 0 : Master : Complete 65