HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 6
Ethernet OAM configuration commands, display oam
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Ethernet OAM configuration commands display oam Syntax View display oam { local | remote } [ interface interface-type interface-number ] [ | { begin | exclude | include } regular-expression ] Any view Default level 2: System level Parameters local: Displays local Ethernet OAM connection information. remote: Displays remote Ethernet OAM connection information. interface interface-type interface-number: Specifies a port by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display oam to display information about an Ethernet OAM connection, including connection status, information contained in the Ethernet OAM packet header, and Ethernet OAM packet statistics. If no interface is specified, this command displays information about all Ethernet OAM connections. Related commands: reset oam. Examples # Display information about the Ethernet OAM connection established on the local port GigabitEthernet 1/0/1. display oam local interface gigabitethernet 1/0/1 Port : GigabitEthernet1/0/1 Link Status : Up EnableStatus : Enable Local_oam_mode : Active Local_pdu : ANY Local_mux_action : FWD Local_par_action : FWD OAMLocalFlagsField : Link Fault : 0 Dying Gasp : 0 1