HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 61
dldp work-mode
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Default level 2: System level Parameters auto: Configures the port shutdown mode as auto mode, where, when a unidirectional link is detected, the port involved is shut down by DLDP. manual: Configures the port shutdown mode as manual mode, where, when a unidirectional link is detected, DLDP generates log and traps to prompt you to shut down the involved port instead of doing so automatically. Description Use dldp unidirectional-shutdown to set the port shutdown mode. Use undo dldp unidirectional-shutdown to restore the default. By default, the port shutdown mode is auto mode. Related commands: dldp work-mode. Examples # Set the port shutdown mode to auto mode. system-view [Sysname] dldp unidirectional-shutdown auto dldp work-mode Syntax dldp work-mode { enhance | normal } View undo dldp work-mode System view Default level 2: System level Parameters enhance: Specifies the enhanced DLDP mode. normal: Specifies the normal DLDP mode. Description Use dldp work-mode to set the DLDP mode. Use undo dldp work-mode to restore the default DLDP mode. By default, a device operates in normal DLDP mode. Examples # Configure the device to operate in enhanced DLDP mode. system-view [Sysname] dldp work-mode enhance 56