HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 25
cfd enable, Description, Examples, Syntax, Default level, Parameters
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767. Description Use cfd cc interval to set the value of the interval field in the CCM messages. Use undo cfd cc interval to restore default. By default, the value of this field is 4 for all CCMs sent. The relationship between the interval field value in the CCM messages, the interval for sending CCM messages, and the timeout time of the remote MEP is shown in Table 7. Table 7 Relationship of interval field value, interval for sending CCMs, and timeout time of remote MEP Interval field value 4 5 6 7 Interval for sending CCMs 1 second 10 seconds 60 seconds 600 seconds Timeout time of remote MEP 3.5 seconds 35 seconds 210 seconds 2100 seconds Related commands: cfd cc enable. Examples # Set the value of the interval field in CCMs sent by MEPs in service instance 2 to 7. system-view [Sysname] cfd cc interval 7 service-instance 2 cfd enable Syntax cfd enable View undo cfd enable System view Default level 2: System level Parameters None Description Use cfd enable to enable CFD. Use undo cfd enable to disable CFD. By default, CFD is disabled. Examples # Enable CFD. system-view [Sysname] cfd enable 20