HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 36

cfd version

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

A MD with no MAs will be deleted. A service instance without the MD name takes effect only in the IEEE 802.1ag standard version of CFD. Related commands: cfd version. Examples # Create service instance 5 without the MD name in CFD IEEE 802.1ag, and configure the ICC-based MA name test_ma1, MD level 3, and VLAN 100 for the service instance. system-view [Sysname] cfd version standard [Sysname] cfd service-instance 5 maid format icc-based test_ma1 level 3 vlan 100 # Create service instance 6 without the MD name in CFD IEEE 802.1ag, and configure the MA named test_ma2, MD level 4, and VLAN 200 for the service instance. system-view [Sysname] cfd version standard [Sysname] cfd service-instance 6 maid format string test_ma2 level 4 vlan 200 cfd version Syntax cfd version { draft5 | draft5-plus | standard } View undo cfd version System view Default level 2: System level Parameters draft5: Specifies that IEEE 802.1ag draft5.2 be used. draft5-plus: Specifies that the IEEE 802.1ag draft5.2 interim version be used. standard: Specifies that the standard version of IEEE 802.1ag be used. Description Use cfd version to configure the CFD protocol version. Use undo cfd version to restore the default. By default, CFD uses the standard version of IEEE 802.1ag. If an MD is created by using the cfd md command or automatically generated by using the cfd service-instance maid format command on a device, you cannot switch between the standard and non-standard versions (draft5.2 version and draft5.2 interim version), however, you can switch between the draft5.2 version and draft5.2 interim version. This restriction does not apply to the device without an MD configured. Related commands: cfd md and cfd service-instance maid format. Examples # Configure the CFD protocol version as IEEE 802.1ag draft5.2. system-view 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
31
A MD with no MAs will be deleted.
A service instance without the MD name takes effect only in the IEEE 802.1ag standard version of CFD.
Related commands:
cfd version
.
Examples
# Create service instance 5 without the MD name in CFD IEEE 802.1ag, and configure the ICC-based
MA name
test_ma1
, MD level 3, and VLAN 100 for the service instance.
<Sysname> system-view
[Sysname] cfd version standard
[Sysname] cfd service-instance 5 maid format icc-based test_ma1 level 3 vlan 100
# Create service instance 6 without the MD name in CFD IEEE 802.1ag, and configure the MA named
test_ma2
, MD level 4, and VLAN 200 for the service instance.
<Sysname> system-view
[Sysname] cfd version standard
[Sysname] cfd service-instance 6 maid format string test_ma2 level 4 vlan 200
cfd version
Syntax
cfd version
{
draft5
|
draft5-plus
|
standard
}
undo cfd version
View
System view
Default level
2: System level
Parameters
draft5
: Specifies that IEEE 802.1ag draft5.2 be used.
draft5-plus
: Specifies that the IEEE 802.1ag draft5.2 interim version be used.
standard
: Specifies that the standard version of IEEE 802.1ag be used.
Description
Use
cfd version
to configure the CFD protocol version.
Use
undo cfd version
to restore the default.
By default, CFD uses the standard version of IEEE 802.1ag.
If an MD is created by using the
cfd md
command or automatically generated by using the
cfd
service-instance maid format
command on a device, you cannot switch between the standard and
non-standard versions (draft5.2 version and draft5.2 interim version), however, you can switch between
the draft5.2 version and draft5.2 interim version. This restriction does not apply to the device without an
MD configured.
Related commands:
cfd md
and
cfd service-instance maid format
.
Examples
# Configure the CFD protocol version as IEEE 802.1ag draft5.2.
<Sysname> system-view