HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 132
vrrp ipv6 vrid timer advertise, vrrp ipv6 vrid track
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Examples # Set the priority of VRRP group 1 on VLAN-interface 2 to 150. system-view [Sysname] interface vlan-interface 2 [Sysname-Vlan-interface2] vrrp ipv6 vrid 1 virtual-ip fe80::2 link-local [Sysname-Vlan-interface2] vrrp ipv6 vrid 1 priority 150 vrrp ipv6 vrid timer advertise Syntax vrrp ipv6 vrid virtual-router-id timer advertise adver-interval View undo vrrp ipv6 vrid virtual-router-id timer advertise Interface view Default level 2: System level Parameters virtual-router-id: VRRP group number, which ranges from 1 to 255. adver-interval: Interval at which the master in the specified VRRP group sends VRRP advertisements. It ranges from 100 to 4095 centiseconds. Description Use vrrp ipv6 vrid timer advertise to configure the Adver_Timer of the specified VRRP group. Use undo vrrp ipv6 vrid timer advertise to restore the default. By default the Adver_Timer is 100 centiseconds. The Adver_Timer controls the interval at which the master sends VRRP packets. Before executing the command, create a VRRP group on an interface and configure the virtual IPv6 address of the VRRP group. Routers in the same VRRP group must use the same Adver_Timer setting. Related commands: display vrrp ipv6. Examples # Set the master in VRRP group 1 to send VRRP advertisements at intervals of 500 centiseconds. system-view [Sysname] interface vlan-interface 2 [Sysname-Vlan-interface2] vrrp ipv6 vrid 1 virtual-ip fe80::2 link-local [Sysname-Vlan-interface2] vrrp ipv6 vrid 1 timer advertise 500 vrrp ipv6 vrid track Syntax vrrp ipv6 vrid virtual-router-id track track-entry-number [ forwarder-switchover member-ip ipv6-address | reduced priority-reduced | switchover ] 127