HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 139
bfd detect-multiplier, bfd echo-source-ip
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
system-view [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] bfd authentication-mode md5 15 BfdKey bfd detect-multiplier Syntax bfd detect-multiplier value View undo bfd detect-multiplier Interface view Default level 2: System level Parameters value: Detect time multiplier, in the range of 3 to 50. Description Use bfd detect-multiplier to configure the detection time multiplier. Use undo bfd detect-multiplier to restore the default. The default is 5. Examples # Configure the detection time multiplier as 6 on VLAN-interface 1. system-view [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] bfd detect-multiplier 6 bfd echo-source-ip Syntax bfd echo-source-ip ip-address View undo bfd echo-source-ip System view Default level 2: System level Parameters ip-address: Source IP address of BFD echo packets. Description Use bfd echo-source-ip to configure the source IP address of BFD echo packets. Use undo bfd echo-source-ip to remove the configured source IP address of BFD echo packets. 134