HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 81

Smart Link configuration commands display smart-link flush Syntax View display smart-link flush [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display smart-link flush to display information about received flush messages. Examples # Display information about received flush messages. display smart-link flush Received flush packets Receiving interface of the last flush packet Receiving time of the last flush packet Device ID of the last flush packet Control VLAN of the last flush packet : 10 : GigabitEthernet1/0/1 : 19:19:03 2010/04/21 : 000f-e200-8500 : 1 Table 25 Command output Field Received flush packets Receiving interface of the last flush packet Receiving time of the last flush packet Device ID of the last flush packet Control VLAN of the last flush packet Description Total number of received flush messages Port that received the last flush message Time when the last flush message was received Device ID carried in the last flush message Control VLAN ID carried in the last flush message 76