HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 92
port monitor-link group
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
uplink: Specifies an uplink port. downlink: Specifies a downlink port. Description Use port to assign a port to the monitor link group. Use undo port to remove a port from the monitor link group. You can assign Layer 2 Ethernet ports or Layer 2 aggregate interfaces to a monitor link group as member ports. A port can be assigned to only one monitor link group. Alternatively, you can assign a port to a monitor link group by using the port monitor-link group command in Layer 2 Ethernet interface view or Layer 2 aggregate interface view. Related commands: port monitor-link group. Examples # Create monitor link group 1, and configure GigabitEthernet 1/0/1 as an uplink port and GigabitEthernet 1/0/2 as a downlink port for monitor link group 1. system-view [Sysname] monitor-link group 1 [Sysname-mtlk-group1] port gigabitethernet 1/0/1 uplink [Sysname-mtlk-group1] port gigabitethernet 1/0/2 downlink port monitor-link group Syntax port monitor-link group group-id { uplink | downlink } View undo port monitor-link group group-id Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters group-id: Monitor link group ID, which ranges from 1 to 16. uplink: Specifies an uplink port. downlink: Specifies a downlink port. Description Use port monitor-link group to assign the current port to a monitor link group as a member port. Use undo port monitor-link group to remove the current port from a monitor link group. A port can be assigned to only one monitor link group. Alternatively, you can assign a port to a monitor link group with the port command in monitor link group view. Related commands: port. 87