HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 128
vrrp ipv6 dscp, vrrp ipv6 method
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Parameters interface interface-type interface-number: Clears VRRP group statistics of a specific interface. interface-type interface-number specifies an interface by its type and number. vrid virtual-router-id: Clears VRRP statistics of the specified VRRP group. virtual-router-id specifies a VRRP group by its group number, which ranges from 1 to 255. Description Use reset vrrp ipv6 statistics to clear VRRP group statistics. If you specify both an interface and a VRRP group, the command clears the statistics about the specified VRRP group on the specified interface. If you specify only an interface, the command clears the statistics about all VRRP groups on the interface. If you specify neither, the command clears statistics about all VRRP groups on the router. Related commands: display vrrp ipv6 statistics. Examples # Clear the statistics about all the VRRP groups on the router. reset vrrp ipv6 statistics vrrp ipv6 dscp Syntax vrrp ipv6 dscp dscp-value View undo vrrp ipv6 dscp System view Default level 2: System level Parameters dscp-value: Sets the DSCP value for VRRP packets, in the range of 0 to 63. Description Use vrrp ipv6 dscp to set the DSCP value for VRRP packets. Use undo vrrp ipv6 dscp to restore the default. By default, the DSCP value in VRRP packets is 56. Examples # Set the DSCP value for VRRP packets to 30. system-view [Sysname] vrrp ipv6 dscp 30 vrrp ipv6 method Syntax vrrp ipv6 method { real-mac | virtual-mac } undo vrrp ipv6 method 123