HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 107

vrrp method

Page 107 highlights

View System view Default level 2: System level Parameters dscp-value: Sets the Differentiated Services Code Point (DSCP) value for VRRP packets, in the range of 0 to 63. Description Use vrrp dscp to set the DSCP value for VRRP packets. Use undo vrrp dscp to restore the default. By default, the DSCP value in VRRP packets is 48. Examples # Set the DSCP value for VRRP packets to 30. system-view [Sysname] vrrp dscp 30 vrrp method Syntax vrrp method { real-mac | virtual-mac } View undo vrrp method System view Default level 2: System level Parameters real-mac: Maps the real MAC address of the interface to the virtual IP address of the VRRP group. virtual-mac: Maps the virtual MAC address to the virtual IP address of the VRRP group. Description Use vrrp method to specify the type of the MAC addresses mapped to the virtual IP addresses of the VRRP groups. Use undo vrrp method to restore the default. By default, the virtual MAC addresses are mapped to the virtual IP addresses of the VRRP groups. Specify the type of the MAC addresses mapped to the virtual IP address before creating a VRRP group. Otherwise, you cannot change the type of the MAC address by using this command. . When VRRP operates in load balancing mode, a virtual IP address is always mapped to a virtual MAC address regardless of which type of the MAC addresses to be mapped to the virtual IP address is specified. Related commands: display vrrp. 102

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159

102
View
System view
Default level
2: System level
Parameters
dscp-value
: Sets the Differentiated Services Code Point (DSCP) value for VRRP packets, in the range of 0
to 63.
Description
Use
vrrp dscp
to set the DSCP value for VRRP packets.
Use
undo vrrp dscp
to restore the default.
By default, the DSCP value in VRRP packets is 48.
Examples
# Set the DSCP value for VRRP packets to 30.
<Sysname> system-view
[Sysname] vrrp dscp 30
vrrp method
Syntax
vrrp method
{
real-mac
|
virtual-mac
}
undo vrrp method
View
System view
Default level
2: System level
Parameters
real-mac
: Maps the real MAC address of the interface to the virtual IP address of the VRRP group.
virtual-mac
: Maps the virtual MAC address to the virtual IP address of the VRRP group.
Description
Use
vrrp method
to specify the type of the MAC addresses mapped to the virtual IP addresses of the
VRRP groups.
Use
undo vrrp method
to restore the default.
By default, the virtual MAC addresses are mapped to the virtual IP addresses of the VRRP groups.
Specify the type of the MAC addresses mapped to the virtual IP address before creating a VRRP group.
Otherwise, you cannot change the type of the MAC address by using this command. .
When VRRP operates in load balancing mode, a virtual IP address is always mapped to a virtual MAC
address regardless of which type of the MAC addresses to be mapped to the virtual IP address is
specified.
Related commands:
display vrrp
.