HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 32
cfd mep enable, cfd meplist
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
[Sysname] cfd service-instance 5 md test_md ma test_ma [Sysname] cfd meplist 3 service-instance 5 [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] cfd mep 3 service-instance 5 inbound cfd mep enable Syntax cfd mep service-instance instance-id mep mep-id enable View undo cfd mep service-instance instance-id mep mep-id enable Layer 2 Ethernet interface view Default level 2: System level Parameters service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767. mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191. Description Use cfd mep enable to enable the MEP configured on a port. Use undo cfd mep enable to disable the MEP. By default, MEP is disabled on a port and cannot respond to various CFD frames (such as LTM frames and LBM frames) unless you enable it. Related commands: cfd mep. Examples # Enable MEP 3 in service instance 5 on GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] cfd mep service-instance 5 mep 3 enable cfd meplist Syntax cfd meplist mep-list service-instance instance-id View undo cfd meplist mep-list service-instance instance-id System view Default level 2: System level 27