HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 54
DLDP configuration commands, display dldp
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
DLDP configuration commands display dldp Syntax View display dldp [ interface-type interface-number ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters interface-type interface-number: Specifies a port by its type and number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display dldp to display the DLDP configuration of a port. If no port is specified, this command displays the DLDP configuration of all DLDP-enabled ports. Examples # Display the DLDP configuration of all the DLDP-enabled ports. display dldp DLDP global status : enable DLDP interval : 5s DLDP work-mode : enhance DLDP authentication-mode : simple, password is ****** DLDP unidirectional-shutdown : auto DLDP delaydown-timer : 2s The number of enabled ports is 2. Interface GigabitEthernet1/1/3 DLDP port state : advertisement DLDP link state : up The neighbor number of the port is 1 (the maximum number ever detected is 2). Neighbor mac address : 0000-0000-0100 Neighbor port index : 79 Neighbor state : two way 49