HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Command - Page 44
display cfd mep
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Level: 5 Level: 6 Level: 7 Maintenance domain: mdtest_5 Maintenance domain: mdtest_6 Maintenance domain: (Without Name) Table 13 Command output Field 8 maintenance domain(s) configured Level Maintenance domain Description Number of MDs configured. Level of MD. Each level allows only one MD. Name of MD. (If the MD does not have a name, this field is displayed as Without Name.) display cfd mep Syntax View display cfd mep mep-id service-instance instance-id [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters mep mep-id: Specifies a MEP by its ID, ranging from 1 to 8191. service-instance instance-id: Specifies a service instance by its ID, ranging from 1 to 32767. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display cfd mep to display the attribute and operating information of a MEP. Examples # Display the attribute and operating information of MEP 50 in service instance 1. display cfd mep 50 service-instance 1 Interface: GigabitEthernet1/0/2 Maintenance domain: mdtest_1 Maintenance association: matest_1 Level: 1 VLAN: 1 Direction: Outbound Administrative state: Active CCM send: Enable FNG state: FNG_DEFECT_REPORTED CCM: 39