IBM 436854u Service Guide - Page 117
Removing the IBM ServeRAID-MR10i SAS/SATA controller
UPC - 883436026772
View all IBM 436854u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Mini-PCI slot Mini-PCI-X enablement card Mini-PCI-X enablement card connector 3. Install and lock the side cover (see "Installing the side cover" on page 53). 4. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server. Removing the IBM ServeRAID-MR10i SAS/SATA controller To remove the IBM ServeRAID-MR10i SAS/SATA controller from the server, complete the following steps: 1. Read the safety information that begins on page vii and "Installation guidelines" on page 47. 2. Turn off the server and all attached devices; then, disconnect all power cords and external cables. 3. Unlock and remove the side cover (see "Removing the side cover" on page 52). 4. If you are replacing the ServeRAID-MR10i SAS/SATA controller, disconnect the signal cables from the controller and the power cable from the power supply; then, remove the controller from the server. 5. If you are instructed to return the adapter, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. Chapter 4. Removing and replacing server components 99