IBM 436854u Service Guide - Page 78

the expansion slot. For a full-length adapter, make sure that the front edge of the adapter is correctly seated in the correct slot in the front adapter-retention bracket. Rear adapter retention bracket Expansion-slot screw Adapter Left side Right side Front adapter retention bracket 6. Install an expansion-slot screw at the rear of the adapter. 7. If you are installing a full-length adapter, press on the release lever on the right side of the front adapter-retention bracket to release the retaining tab on the left side of the bracket. 8. Connect required cables to the adapter. Route cables so that they do not block the flow of air from the fans. 9. Install and lock the side cover (see "Installing the side cover" on page 53). 10. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server. 60 System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide