IBM 436854u Service Guide - Page 164
Reseat the Remote Supervisor Adapter II SlimLine if one is installed.
UPC - 883436026772
View all IBM 436854u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 3, "Parts listing, System x3200 M2 Types 4367 and 4368," on page 33 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Symptom Action The monitor works when you turn on the server, but the screen goes blank when you start some application programs. 1. Make sure that: v The application program is not setting a display mode that is higher than the capability of the monitor. v You installed the necessary device drivers for the application. 2. Run video diagnostics (see "Running the diagnostic programs" on page 156). v If the server passes the video diagnostics, the video is good; see "Solving undetermined problems" on page 229. v (Trained service technician only) If the server fails the video diagnostics, replace the system board. The monitor has screen jitter, or 1. If the monitor self-tests show that the monitor is working correctly, consider the the screen image is wavy, location of the monitor. Magnetic fields around other devices (such as unreadable, rolling, or distorted. transformers, appliances, fluorescent lights, and other monitors) can cause screen jitter or wavy, unreadable, rolling, or distorted screen images. If this happens, turn off the monitor. Attention: Moving a color monitor while it is turned on might cause screen discoloration. Move the device and the monitor at least 305 mm (12 in.) apart, and turn on the monitor. Notes: a. To prevent diskette drive read/write errors, make sure that the distance between the monitor and any external diskette drive is at least 76 mm (3 in.). b. Non-IBM monitor cables might cause unpredictable problems. 2. Reseat the monitor cable. 3. Reseat the Remote Supervisor Adapter II SlimLine (if one is installed). 4. Replace the following components one at a time, in the order shown, restarting the server each time: a. Monitor b. Remote Supervisor Adapter II SlimLine c. (Trained service technician only) System board Wrong characters appear on the 1. If the wrong language is displayed, update the BIOS code with the correct screen. language (see "Updating the firmware" on page 15). 2. Reseat the monitor cable. 3. Replace the following components one at a time, in the order shown, restarting the server each time: a. Monitor b. (Trained service technician only) System board 146 System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide