IBM 436854u Service Guide - Page 151

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 3, "Parts listing, System x3200 M2 Types 4367 and 4368," on page 33 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 1805 PCI option ROM checksum error. 1. Remove the failing adapter. 2. Reseat each adapter. 3. Replace the following components one at a time, in the order shown, restarting the server each time: a. Failing PCI or PCI Express adapter b. (Trained service technician only) System board 1806 PCI built in self-test failure. 1. If the error code indicates a particular PCI or PCI-Express slot or device, remove that device. 2. Reseat the following components: a. Each adapter b. (Trained service technician only, if the specified board is a FRU) The board that is indicated in the error code. (See Chapter 3, "Parts listing, System x3200 M2 Types 4367 and 4368," on page 33 to determine CRU or FRU status.) 3. Replace the components listed in step 2 one at a time, in the order shown, restarting the server each time. 1807 General PCI error. 1. Make sure that no devices have been disabled in the Configuration/Setup Utility program. 2. Replace each adapter one at a time, restarting the server each time. Chapter 5. Diagnostics 133