IBM 436854u Service Guide - Page 133
fan sink mounting bracket, and screws aside for use later.
UPC - 883436026772
View all IBM 436854u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Fan-sink mounting bracket slots System board mounting screws (8 places) 10. Slide the system board toward the front of the server to disengage the tabs on the fan sink mounting bracket from the slots on the bottom of the chassis; then, carefully lift the system board out of the server. 11. Remove the four screws that secure the fan sink retention module and fan sink mounting bracket to the system board; then, set the fan sink retention module, fan sink mounting bracket, and screws aside for use later. Note: Make sure that you observe the orientation of the fan sink retention module before you move it so that when you reinstall it, you install it in the same orientation. Chapter 4. Removing and replacing server components 115
System board
mounting screws
(8 places)
Fan-sink mounting
bracket slots
10.
Slide the system board toward the front of the server to disengage the tabs on
the fan sink mounting bracket from the slots on the bottom of the chassis;
then, carefully lift the system board out of the server.
11.
Remove the four screws that secure the fan sink retention module and fan sink
mounting bracket to the system board; then, set the fan sink retention module,
fan sink mounting bracket, and screws aside for use later.
Note:
Make sure that you observe the orientation of the fan sink retention
module before you move it so that when you reinstall it, you install it in the
same orientation.
Chapter 4. Removing and replacing server components
115