IBM 436854u Service Guide - Page 145

POST error codes The following table describes the POST error codes and suggested actions to correct the detected problems. v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 3, "Parts listing, System x3200 M2 Types 4367 and 4368," on page 33 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 062 Three consecutive boot failures using the 1. Update the system firmware to the latest level default configuration. (see "Updating the firmware" on page 15). 2. (Trained service technician only) Replace the system board. 101 Tick timer internal interrupt failure. (Trained service technician only) Replace the system board. 102 Internal timer channel 2 test failure. (Trained service technician only) Replace the system board. 106 Diskette controller error. 1. Make sure that the Configuration/Setup Utility program correctly reflects the diskette drive information. 2. Reseat the diskette drive cable. 3. Reseat the diskette drive. 4. Replace the following components one at a time, in the order shown, restarting the server each time: a. Diskette drive cable b. Diskette drive c. (Trained service technician only) System board 151 Real-time clock error. 1. Reseat the battery. 2. Replace the following components one at a time, in the order shown, restarting the server each time: a. Battery b. (Trained service technician only) System board Chapter 5. Diagnostics 127