Kyocera KM-8530 KM-8530 Operation Guide - Page 11

Features of the KM-8530 (continued) • Chapter Starts chapter pages on the right side (front pages) of the finished document. Only duplex mode (1a2) is compatible with this feature. • Combination Copies a fixed number (2, 4, or 8) of pages onto one sheet of copy paper to create a draft copy of a multi-page report at the same time as saving paper. • Copy Density Manually selects up to 9 density levels. • Copy Mode Selects the desired simplex mode (1a1 or 2a1); or duplex mode (1a2 or 2a2). • Counter List Displays on the screen and prints the following data: total counter of the machine, copier counter, print counter and the date when the counter started. • Density Shift Shifts each of nine density levels in four density modes (Auto, Text, Photo, Increase Contrast) to three levels lighter or three levels darker. • Frame/Fold Erasure Erases border and/or fold image area using Frame (1 - 300mm), Fold (1 - 99mm), or Frame & Fold. • Image Insert Stores pages in memory from the platen glass, and inserts the pages into a document copied from the document feeder. • Image Shift Creates or removes a binding margin at the top, bottom, right and left edges (shift amount from 0 ~ 250mm, in 1mm increments); reduces image to prevent image loss (reduce & shift amount from 0 ~ 250mm, in 1mm increments). • Interrupt Copying Interrupts copying-in-progress to perform an urgent copy, using any of the copier features for the interrupt job. • Job Memory Programs up to 30 jobs and recalls each job by job number, as needed. All compatible platen glass functions can be programmed into Job Memory directly after they are selected. ix