Kyocera KM-8530 KM-8530 Operation Guide - Page 297

Setting E.C.M. Function (Environment Setup) Perform the following Key Operator settings concerning the E.C.M. function using the web browser on a PC. • E.C.M. Data Add (see step 4.) Add a new E.C.M. data (password, name, and copy limit) to the E.C.M. list. • E.C.M. Data List (see step 5.) Change or delete the E.C.M. data (password, name, or copy limit) in the list, or reset the counters. • E.C.M. Function Setting (see step 6.) Specify the following E.C.M. function settings. Switching the E.C.M.: ON/OFF Effect when the copy limit is reached: Immediately / After job / Warning E.C.M. password: 8 digits / under 8 digits E.C.M. password input timing: Auto reset timer/ Complete job Wrong E.C.M. password (from printer): Accept / Reject DETAILS The above settings can also be performed on the machine except for the Wrong E.C.M. password (from printer) setting, or may require the operation on the machine. Refer to p. 13-15 and p. 13-39 ~ p. 13-44. HINT The E.C.M. (Electronic Copy Monitor) appears as E.K.C. (Electronic Key Counter) in the Web Utilities windows. 1. Open the Web Utilities window. Server Functions Image Store/Delete Image Store&Output Image Recall To Use Web Utilities Machine Information HINT See p. 10-17 for detailed procedure to access the Web Utilities. 2. Click on [Environment Setup]. 3. Display the E.C.M. Function Setting window. Enter the 4-digit Key Operator password, then click on [Apply]. Job Status HDD Job Information Environment Setup 10 Network Function 10-29