Kyocera KM-8530 KM-8530 Operation Guide - Page 199

Copying Non-Standard Size Originals (Original Form) (continued) 3. Touch the desired size key. DETAILS When selecting WHOLE AREA on the Non STD size mode menu, the copier scans the whole area of the platen glass and copies with the paper size or magnification ratio currently selected. 4. Touch OK on the popup menu to complete the setting. The popup menu will disappear. 5. Touch OK to complete the setting and return to the Basic Screen. 6. Load copy paper. HINTS • To load tabbed copy paper in the Multi-sheet bypass tray, specify the paper type as Tab paper. See p. 3-30 to p. 3-33. To load tabbed copy paper in any other tray, specify the paper type as Tab paper in the Key Operator mode. See p. 13-23 to p. 13-24. • For the procedure of tabbed copy paper supply, see p. 2-28 to p. 2-30. 7. Enter the desired print quantity from the control panel keypad. HINT See p. 3-7 for details on setting print quantity. 8. Position original(s) FACE UP in the document feeder, or FACE DOWN on the platen glass. HINTS • See p. 3-3 to p. 3-6 for details on positioning originals. • Use RADF store mode (p. 3-34 to p. 3-35) when the original count exceeds 100. 9. Press [START]. Original Direction Text/Photo Enhance Mixed Original Z-Folded Original SDF Original Form 8 Special Original CAUTION When the finisher / trimmer unit / paper exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. 8-13