Kyocera KM-8530 KM-8530 Operation Guide - Page 83
Density Shift, SPECIAL ORIGINAL, P COUNTER
View all Kyocera KM-8530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Selecting Density Level (continued) Density Shift Use this function to shift each of nine density levels to three levels lighter or three levels darker. This function can be set to use in combination with AUTO (Text/Photo), Text, Photo and Increase Contrast modes and the general mode. Density shift 0 Density shift 1 Density shift 2 3 Copying Operations Positioning Originals Setting Print Quantity Set Job During Warmup Density shift 3 Density shift 4 Density shift 5 Stop Scan/Print Copy Size 1. Touch SPECIAL ORIGINAL on the Basic Screen. The Special Original popup menu will be displayed. 2. Select the desired mode. Lens Mode Density 1-1, 2-2 2-1 Multi-Sheet Bypass Tray Using Memory Output without Finisher DF-630/635 Output Modes (eg.) To set the Text mode, touch Text to highlight it. 3. Press [P (COUNTER)]. The following message will be displayed. Binding Mode Recalling Previous Job Density Shift (Text) 2 (0 ~ 5) 4. Press any key (from 0 to 5) using the keypad to determine the Density shift. Check Mode & Proof Copy Interrupt Mode Entering 6 or above will be ignored. 5. Touch OK on the Special Original popup menu. Density shift in the selected enhance mode is determined. 3-21