Kyocera KM-8530 KM-8530 Operation Guide - Page 383
] Finisher mode by AUTO RESET, 10] Platen APS
View all Kyocera KM-8530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 383 highlights
[13] Memory Switch Setting (continued) 3 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. 4 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations. The following functions can be provided by the Memory switch settings. [1] Auto reset timer Set the reset interval starting from the completion of a copying job until the machine returns to the initial condition. [2] AUTO RESET key function Set the condition of the following modes when [AUTO RESET] is pressed: Copy mode, Copy density, Magnification, Tray selection. [3] RADF-Original effect Set the machine condition when original is set on RADF in non-RADF mode with RADF unit closed. [4] Job memory auto recall (30) Job memory No. 30 is automatically recalled when power is turned on or when Auto Reset is restored. This job recall function works only when Job No. 30 is registered. [5] Finisher mode by AUTO RESET Set the Finisher mode to be recalled when [AUTO RESET] is pressed. [6] Initial by Key counter insert Set the machine to return to the initial state when Key counter is inserted. [7] Erasure outside area of original Set the machine to delete the outside area of original. [8] RADF frame erasure selection Set Frame erasure to function anytime in RADF mode. [9] Automatic tray switching When paper is depleted during a copying job, the copier continues copying by switching to another tray that contains the same size paper. [10] Platen APS The copier automatically selects the same size copy paper as the original placed on the platen glass. (In reduction or enlargement mode, an appropriate paper size is selected according to the ratio selected.) 13-41 Key Operator Mode System Initial Setting Copier Initial Setting User Setting Mode E.C.M. Lock/Delete Job Memory Paper Type/ Special Size Panel Contrast/ Key Sound Key Operator Data Setting Weekly Timer Control Panel Adjustment Tray Auto Select Setting Power Save Setting Memory Switch Machine Management List Print Side 2 Lens Adjustment Finisher Adjustment HDD Management Scan Transmission Non-Image Area Erase Timing Adjustment Centering Adjustment 13 Key Operator Mode