Kyocera KM-8530 KM-8530 Operation Guide - Page 164

Making Folded Booklet (Folding / Stapling&Folding) (continued) When selecting STAPLING & FOLDING, the machine with the trimmer unit installed selects TRIM automatically. To cancel the trimming mode, touch TRIM to deselect it. 4. Touch OK on the Output Mode popup menu. The Basic Screen will be restored and the selection made in the output mode will be reflected in the OUTPUT icon area. 5. Select additional copying features, as required. DETAILS NO COVER SHEET of the Booklet is initially selected. To change this selection, touch APPLI. on the Basic Screen to display the Application Selection Screen, then touch Booklet twice to display the Booklet Mode Selection Screen to make another selection or to release the setting. 6. Enter the desired print quantity from the control panel keypad. HINT See p. 3-7 for details on setting print quantity. 7. Position original(s). HINT See p. 3-2 to p. 3-6 for details on positioning originals. DETAILS When loading originals, heed the following limits on capacity: Folding mode: 12 pages or less for simplex copying 6 pages or less for duplex copying Stapling & Folding mode: 80 pages or less for simplex copying 40 pages or less for duplex copying Exceeding the above capacity limits may cause trouble in the Finisher. 8. Press [START]. CAUTION When the Booklet tray capacity is exceeded, the Finisher will cease operating. To avoid this, select the appropriate print quantity from the specifications shown on p. 7-8. 7-10