Kyocera KM-8530 KM-8530 Operation Guide - Page 146

Troubleshooting Tips (continued) THE BASIC SCREEN DOES NOT DISPLAY SETTINGS AS DESCRIBED IN INSTRUCTION MANUAL Check with the Key Operator, as Initial Settings may have been changed. "PLEASE CHECK ORIGINAL" This message displays when the copier detects a non-standard paper size on the platen glass. Select copy size and press [START]. 1.00 magnification will be selected automatically. If this message continues to display after selecting copy size, select 1.00 magnification, even if it is already indicated, then press [START]. If desired, ask your service representative to enable the machine to default to 1.00 magnification in this situation. SHEET INSERTION RESULT IS NOT AS EXPECTED Blank insertion: Be sure manuscript originals do not already include blank sheets in the locations designated for sheet insertion. Copy insertion: To ensure that chapter sheets in 1-2 mode always appear on the right hand side in the finished set, insertion sheets must be designated on the page setting screen with odd numbers, not even. If required, make an even numbered original page odd by inserting a blank sheet in front of that page, so that the blank sheet is even and the insertion sheet is odd. FINISHER STAPLE RESULT IS NOT AS EXPECTED The 2 staple position functions only on copy paper that is loaded vertically (portrait style). COPIES SKEW IN THE STAPLED SETS Check to see if copy paper is excessively curled in the tray. Reload the copy paper upside down. USING PUNCH, COPIES CANNOT BE PUNCHED Check to see if the message "Trash basket of Punching unit is full" is displayed. Empty the trash basket. COPIES CANNOT BE STAPLED OR PUNCHED IN POSITION Check to make sure the side guide plates are securely aligned to the copy paper in the paper tray to be used. USING TRIMMER, COPIES CANNOT BE TRIMMED Check to see if the message "Trash basket of Trimmer is full" is displayed. Empty the trash basket. 5-16