Kyocera KM-8530 KM-8530 Operation Guide - Page 65

Positioning Originals (continued) Positioning originals in Mixed original mode Mixed size originals can be copied together from the document feeder. HINT To use the Mixed original mode, see procedure on p. 8-6 to p. 8-7. 1. Arrange originals in order. Arrange the mixed size originals as illustrated below. To the depth To the left Setting direction 3 Copying Operations Positioning Originals Setting Print Quantity Set Job During Warmup Stop Scan/Print Copy Size Lens Mode Reminder! Density • Before placing originals in the tray, be sure the document feeder is closed fully. Once closed, do not open the document feeder, otherwise the selected copy conditions may be altered automatically. • Be sure not to use unsuitable RADF originals. See p. 11-8 for details. HINT See p. 11-9 for available combinations of mixed originals. 1-1, 2-2 2-1 Multi-Sheet Bypass Tray 2. Position mixed originals FACE UP, aligned with the left rear side of Using Memory the document feeder tray. Place two-sided originals with page one FACE UP. Output without Finisher Up to 100 originals can be set at a time. DF-630/635 3. Adjust paper guides. Output Modes Binding Mode Recalling Previous Job Check Mode & Proof Copy Interrupt Mode 3-3