Kyocera KM-8530 KM-8530 Operation Guide - Page 377

[9] Weekly Timer (continued) [5] Timer Interrupt Password Setting Use this password setting mode to establish a 4-digit password requirement for using Timer Interrupt function. The default password of 0000 allows the timer function to be interrupted without the requirement for password entry. Weekly Timer Setting Menu Screen Timer Interrupt Password Setting Screen Key Operator Mode System Initial Setting Copier Initial Setting User Setting Mode E.C.M. Procedure 1 Touch [9] Weekly timer on the Key Operator Mode Screen. Enter your 4-digit Weekly Timer master key code, then touch OK to display the Weekly Timer Setting Menu Screen. NOTE: If an invalid Weekly Timer master key code is entered, continue by entering the valid 4-digit code. 2 Touch [5] Timer interrupt password set to display the Timer Interrupt Password Setting Screen. 3 Use the touch screen keypad to enter a 4-digit password, and then touch OK to complete the setting and return to the Weekly Timer Setting Menu Screen. NOTE: When the password setting is 0000, timer interrupt can be used simply by turning the copier OFF, then ON. In this case, you will be asked to enter the duration of use (a period of time to turn the copier power on). 4 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. 5 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations. 13-35 Lock/Delete Job Memory Paper Type/ Special Size Panel Contrast/ Key Sound Key Operator Data Setting Weekly Timer Control Panel Adjustment Tray Auto Select Setting Power Save Setting Memory Switch Machine Management List Print Side 2 Lens Adjustment Finisher Adjustment HDD Management Scan Transmission Non-Image Area Erase Timing Adjustment Centering Adjustment 13 Key Operator Mode