Kyocera KM-8530 KM-8530 Operation Guide - Page 77

Selecting Magnification Ratio (Lens Mode) When the copier is turned ON, the magnification ratio is set to 1.00 (100%) automatically on the Basic Screen. Follow each procedure described in this section to select the desired magnification ratio. To Copy in 1.00 Magnification Mode Follow this procedure to make a 100% copy of the original image. 1. Close the RADF securely, then press [AUTO RESET]. 3 Copying Operations Positioning Originals Setting Print Quantity Set Job During Warmup Stop Scan/Print Copy Size Lens Mode Density The initial settings are restored. Check that APS is highlighted to indicate that the 1.00 magnification is selected. HINT The initial settings may be altered by the Key Operator. See p. 13-10 to p. 13-11. 2. Select additional copy conditions, as desired. 1-1, 2-2 2-1 Multi-Sheet Bypass Tray Using Memory DETAILS Output without Finisher Specifying copy size will release 1.00 magnification and set AMS automatically. DF-630/635 In this case, touch 1:1 to highlight it again. Output Modes 3. Enter the desired print quantity from the control panel keypad. Binding Mode HINT See p. 3-7 for details on setting print quantity. 4. Position original(s). HINT See p. 3-2 to p. 3-6 for details on positioning originals. 5. Press [START]. Recalling Previous Job Check Mode & Proof Copy Interrupt Mode 3-15