Kyocera KM-8530 KM-8530 Operation Guide - Page 355
[2] User Density Level 2 Setting
View all Kyocera KM-8530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 355 highlights
[3] User Setting Mode (continued) [2] User Density Level 2 Setting Output copying samples from 16 density levels from Lighter to Normal or Normal to Darker, then select the desired exposure and program it as USER2. The programmed copy density can be recalled by selecting USER2 on the Basic Screen. User Setting Mode Menu Screen User Density Level 2 Setting Screen Key Operator Mode System Initial Setting Copier Initial Setting User Setting Mode E.C.M. Procedure 1 Touch [3] User setting mode on the Key Operator Mode Screen to display the User Setting Mode Menu Screen. 2 Touch [2] User density level 2 setting to display the User Density Level 2 Setting Screen. 3 Place the original on the platen glass. 4 Touch Darker or Lighter to select the density level to be programmed. 5 Touch No.1 1~4, No.2 5~8, No.3 9~12, No.4 13~16, or Set density ##, then press [START]. The density level sample sheet will be output. 6 Select the desired exposure from the sample sheet(s), then enter the density level No. by using the touch screen keypad. 7 Touch OK to complete the setting and return to the User Setting Mode Menu Screen. 8 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. 9 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations. 13-13 Lock/Delete Job Memory Paper Type/ Special Size Panel Contrast/ Key Sound Key Operator Data Setting Weekly Timer Control Panel Adjustment Tray Auto Select Setting Power Save Setting Memory Switch Machine Management List Print Side 2 Lens Adjustment Finisher Adjustment HDD Management Scan Transmission Non-Image Area Erase Timing Adjustment Centering Adjustment 13 Key Operator Mode