Kyocera TASKalfa 181 Scan System (F) B Operation Guide (Functions Edition) - Page 29
System Basic Setting, IP-Filters, Starting Address, Registration, The setting shown in the screen
View all Kyocera TASKalfa 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setting Scanner from a Web Browser NOTE: IP-Filters can be configured for Address Editor as well. 1 Enter the scanner's IP address into the Web browser to show the scanner home page. 2 Click System Basic Setting at the left side of the screen. 3 Click IP-Filters. 4 Check the box to the left of the protocol name to enable filtering for that protocol. 5 Up to 4 IP address ranges can be enabled for filtering. To filter a single IP address, only enter the Starting Address. 6 Click the Registration button. NOTE: The setting shown in the screen only allows access from the IP address range 10.10.10.1 - 50 and from IP address 10.10.10.125 to the scanner's home page (HTTP) and Address Editor. 2-9
Setting Scanner from a Web Browser
2-9
NOTE:
IP-Filters can be configured for Address Editor as well.
1
Enter the scanner's IP address into the Web browser to show the scanner home page.
2
Click
System Basic Setting
at the left side of the screen.
3
Click
IP-Filters
.
4
Check the box to the left of the protocol
name to enable filtering for that protocol.
5
Up to 4 IP address ranges can be enabled for filtering. To filter a single IP address, only enter the
Starting Address
.
6
Click the
Registration
button.
NOTE:
The setting shown in the screen
only allows access from the IP address
range 10.10.10.1 - 50 and from IP
address 10.10.10.125 to the scanner's
home page (HTTP) and Address Editor.