Kyocera TASKalfa 181 Scan System (F) B Operation Guide (Functions Edition) - Page 90
Unable to Connect to Scanner, Maximum image size, Scan. Setup, Address Setting, Use Management Code
View all Kyocera TASKalfa 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Included Scanner Utilities Registration method 1 Click the Scan. Setup button on the TWAIN Source main dialog box. The Scanner Setup dialog box is shown. 2 Click the Edit button. The Address Setting dialog box is shown. 3 Click the Use Management Code check box to add a check mark. 4 To always use the same code, enter the desired Job code (8 digits or less) in the Code field. 5 Enter the same Job code entered into the Code field again in the Confirm Code field. 6 Click the OK button. 7 If a Job code is not configured, a Job code entry screen will be displayed during connection. Enter the code to be used. Unable to Connect to Scanner One of the following problems may be preventing scanner connection. Try again after confirming the scanner operation panel. • The machine is currently copying or operating in a mode other than Wait for Scan mode. • Original has been loaded into the optional document processor before connecting TWAIN Source to the scanner. Maximum image size Depending on available memory, scanning of certain image sizes may not be possible. A3 A4 11 × 17" 8 1/2 × 11" 200 dpi 0.9 MB 0.5 MB 0.9 MB 0.4 MB 300 dpi 2.1 MB 1.0 MB 2.0 MB 1.0 MB 400 dpi 3.7 MB 1.8 MB 3.6 MB 1.8 MB 600 dpi 8.3 MB 4.1 MB 8.0 MB 4.0 MB 3-46