Lexmark C524 User's Guide - Page 84
Cleaning the printhead lenses, Solving print quality problems, Troubleshooting, - transfer belt warning
View all Lexmark C524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Maintaining the printer To replace the transfer belt, see the Replacing the transfer belt sheet that comes with a replacement transfer belt. Cleaning the printhead lenses Clean the printhead lenses when print quality problems become apparent as mentioned in Solving print quality problems in the Troubleshooting chapter. Warning: To avoid overexposing the photoconductor units to light, do not leave the inner door open longer than 10 minutes. 1 Turn the printer off. 2 Open the upper door and the inner door. The lower door comes open with the inner door. 3 Remove all four toner cartridges. If help is needed, see the illustration on page 32. 4 Locate the four printhead lenses as shown. Printhead lenses 5 Clean the lenses using a can of compressed air (same as the compressed air used to clean a camera lens). Warning: Do not touch the printhead lenses or they may be damaged. 6 Install the four toner cartridges. 7 Close the doors. 8 Turn the printer on. Cleaning the printhead lenses 84