Motorola i870 User Guide - Page 39
Making Code Calls, Receiving All MOTOtalk Calls, Channels and Codes
View all Motorola i870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4 Select a code. 5 When you are finished, press A under Back to return to the MOTOtalk idle screen. Making Code Calls To make a code call: 1 From the MOTOtalk idle screen or the channel and code edit screen, press and hold the PTT button. Transmit appears on the first line of display. Begin speaking after your phone emits the MOTOtalk tone. Note: The MOTOtalk tone consists of 4 rapid beeps. 2 Release the PTT button to listen. If you receive an error message: • No one is on your channel or code. • You are out of range. Receiving Code Calls When you receive a code call, Receive will appear on the display. After hearing the MOTOtalk tone, you have 6 seconds to reply before the call times out. To reply to the call, press the PTT button. Channels and Codes Note: An incoming MOTOtalk call can be terminated at any time by pressing e. Receiving All MOTOtalk Calls If you set the code to Receive All, your phone can receive MOTOtalk transmissions from any phone that is set to the same channel, regardless of the code (1-15). When you receive transmissions with the code set to Receive All, the code that the transmission was received on will replace Receive All on the display. Note: You cannot initiate a code call when the code is set to Receive All. To set the code to Receive All: 1 From the MOTOtalk idle screen, press A under Edit. 2 Scroll to Code. 3 Press A under Edit. 4 Select Receive All. 5 When you are finished, press A under Back to return to the MOTOtalk idle screen. To reply to a call with the code set to Receive All: Press the PTT button. 27