Netgear WC7600 Reference Manual - Page 106

ProSAFE Wireless Controller WC7600 The basic Authentication Server screen displays. The following figure shows the fields for an external LDAP server: 5. Select the radio button that corresponds to the authentication server that you want to set up: • External RADIUS Server • Internal Authentication Server • External LDAP Server 6. Configure the settings that correspond to the selected authentication server as described in the following table: Setting External RADIUS Server Description Enable Authentication Select the Enable Authentication check box to enable authentication. Enable Accounting Select the Enable Accounting check box to enable accounting. Primary Server Secondary Server Do the following for each server: 1. Specify the IP address. 2. Specify the port. The default port is 1812. 3. Specify the shared secret. For information about shared secret requirements, see Table 11 on page 306. Reauthentication time Specify the time (in seconds) after which reauthentication occurs (Seconds) for all wireless clients. Update Global Key Every (Seconds) To enable update of the global key: 1. Select the Update Global Key Every (Seconds) check box. 2. Specify the interval (in seconds) after which the global key is updated for all wireless clients. Manage Security Profiles and Profile Groups 106