Netgear WC7600 Reference Manual - Page 66
To add a DHCP server and con its settings, admin, password, Login
View all Netgear WC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
ProSAFE Wireless Controller WC7600 To add a DHCP server and configure its settings: 1. Open a web browser. In the browser's address field, type the http:// followed by the IP address that you assigned to the wireless controller. By default, the IP address is 192.168.0.250. If you have not yet assigned another IP address to the wireless controller, type http://192.168.0.250. The wireless controller's login screen displays. 2. Enter your user name and password. If you have not yet personalized your user name and password, enter admin for the user name and password for the password, both in lowercase letters. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary screen. 4. Select Configuration > System > DHCP Server. The DHCP Server List screen displays. The following figure shows part of the DHCP Server List screen. Because this screen is wide, it is shown in the following two figures: Configure the System and Network Settings and Register the Licenses 66