Netgear WC7600 Reference Manual - Page 39
Vlans 1
View all Netgear WC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ProSAFE Wireless Controller WC7600 This network configuration has the following prerequisites: • VLAN 1 is configured on the wireless controllers, core switch, and PoE switches. This VLAN is untagged. • VLANs 10, 20, and 30 are configured on the wireless controllers, core switch, and the PoE switch in Building 1. These VLANs are tagged. • VLANs 1, 10, 20, 30, and 40 are configured on the wireless controllers, core switch, and PoE switches. Except for VLAN 1, these VLANs are tagged. To provision the wireless controller: Step Configuration Web management interface path 1. Configure the basic system settings: 1. Configure the country code of operation. Configuration > System > General 2. Configure the time settings. Configuration > System > Time 3. Configure the IP address of wireless controller. 4. Verify that VLAN 1 is set as the management VLAN and is marked as untagged. By default, VLAN 1 an untagged management VLAN. Configuration > System > IP/VLAN 2. Configure the following profiles, and configure network authentication and data encryption for these profiles: 1. A profile with SSID 1 and VLAN 10. 2. A profile with SSID 2 and VLAN 20. Configuration > Profile > Basic 3. A profile with SSID 2 and VLAN 30. 4. A profile with SSID 3 and VLAN 40. 5. If necessary for the selected network authentication options, Configuration > Security > Basic > configure one or more authentication servers. Authentication Server 3. Configure the following profile groups: 1. A profile group with the name Building 1, to which you add the Configuration > Profile > Advanced following profiles: - The profile with SSID 1 and VLAN 10 - The profile with SSID 2 and VLAN 20 - The profile with SSID 2 and VLAN 30 2. A profile group with the name Building 2, to which you add the following profiles: - The profile with SSID 1 and VLAN 10 - The profile with SSID 2 and VLAN 30 - The profile with SSID 3 and VLAN 40 4. Deploy the access points and connect them to PoE switches. System Planning and Deployment Scenarios 39